choosing a pot...

[peasandhoney]

so i've gotten the run around everywhere i've asked this question (stew mac, fishman, etc...) so i bring it here. i am building an EUB and plan to use a piezo pick up in the bridge and a agular preamp. agular said to use the volume pot that the pick up manufacture recomends. so what pot do i use with a 1 meg ohm piezo? thanks...


-keiran

[Pete OLeary]

Originally Posted by peasandhoney

so i've gotten the run around everywhere i've asked this question (stew mac, fishman, etc...) so i bring it here. i am building an EUB and plan to use a piezo pick up in the bridge and a agular preamp. agular said to use the volume pot that the pick up manufacture recomends. so what pot do i use with a 1 meg ohm piezo? thanks...

Putting a pot inline with the piezo is not a good way to go. Look at using a small preamp in your EUB, thereby making the system "active".

[peasandhoney]

thats the idea. but the pre amp i want to use

http://www.aguilaramp.com/html/suppo...iagramobp1.htm

calls for you to use your own volume pot.

[mje]

Originally Posted by peasandhoney

thats the idea. but the pre amp i want to use

http://www.aguilaramp.com/html/suppo...iagramobp1.htm

calls for you to use your own volume pot.

That preamp isn't appropriate for use with piezoelectric pickups- it's designed for something in the 250K range. You don't want any pot between a piezo pickup and the preamp. The pot should follow the preamp.

I wonder if you can get a K&K without the case, designed for building in? Bob?