Go Back   TalkBass Forums > Double Bass Forums > Amps, Mics & Pickups [DB]
Register Rules/FAQ/CUP Members List Calendar Search Today's Posts Mark Forums Read

Amps, Mics & Pickups [DB] Discuss anything related to amplifying your double bass


Supporting Membership
Thank You
NOT's Avatar
NOT

Latest Supporting Member
Donate to Upgrade Today

Reply
 
Thread Tools Search this Thread
  #1  
Old 12-04-2005, 04:26 PM
Registered User
 
Join Date: Mar 2004
Location: Sweden
Send a message via MSN to jannejava
Dominants and boomy Stat-B

After all the talk here at TBL I decided to try a set of Domintants (orchestra). This is the string! But they havn't settle down yet so they are a bit twangy.

But now I have trouble with the low end from my Stat-B. It is too boomy. I tend to get feedback in the lower registers. My little GK is having a hard time. If I roll off the bass theres no tone left.

I assume a high pass filter like Fishman Bass Pro would sort this out, but I wonder if other Stat-B users have the same experience. Is there something I can do on the bass?

Regards, Jan
Sign in to disble this ad
  #2  
Old 12-04-2005, 04:39 PM
Registered User
 
Join Date: Mar 2005
Location: Chicago, IL
Are you playing on a GK MB150 combo? If so, I can tell you what has worked for me with Dominants -> Stat-B -> GK.

-10 dB pad: ON
Treble: 10 o clock
Hi Mid: 10-11 o clock
Lo Mid: 11 o clock
Bass: 12 o clock
Limiter: OFF, I do not think this does any good
Voicing Filter: ON, use a LITTLE bit of contour and NO high boost
Chorus: OFF

Here is something to try for relative volume levels:

Stat-Pre preamp: 12 o clock
Output level: 1 o clock
Volume: 11 o clock

My results have been pretty decent with that setup. Fiddle with the contour knob carefully... in my experience I have always been able to find one spot where it cuts out the crud from the bottom of the sound, but does not kill tone. It's a delicate balancing act.

Also, your bass is obviously a different instrument from mine. I can't say that the approximate settings I use will do anything positive for you.
__________________
Homo doctus semper in se divitias habet.
  #3  
Old 12-05-2005, 01:55 AM
Registered User
 
Join Date: Mar 2004
Location: Sweden
Send a message via MSN to jannejava
Thanks for the reply! Do you use the little Low Cut-button?
  #4  
Old 12-05-2005, 07:57 AM
drurb's Avatar
Oracle, Ancient Order of Rass Hattur
 
Join Date: Apr 2004
Location: Connecticut
Supporting Member
Quote:
Originally Posted by jannejava
After all the talk here at TBL I decided to try a set of Domintants (orchestra). This is the string! But they havn't settle down yet so they are a bit twangy.

But now I have trouble with the low end from my Stat-B. It is too boomy. I tend to get feedback in the lower registers. My little GK is having a hard time. If I roll off the bass theres no tone left.

I assume a high pass filter like Fishman Bass Pro would sort this out, but I wonder if other Stat-B users have the same experience. Is there something I can do on the bass?

Regards, Jan
If it is boomy, a high-pass filter will likely do you no good. The "boomy" region, as it is perceived, is usually well above the lowest frequencies that you do want to reproduce. So, a high-pass filter set to tame the boomy region, would attenuate those low frequencies even further.
  #5  
Old 12-05-2005, 09:11 AM
Registered User
 
Join Date: Mar 2005
Location: Chicago, IL
Quote:
Originally Posted by jannejava
Thanks for the reply! Do you use the little Low Cut-button?
Yes, but I do not use any high boost, and I use only a modest amount of low cut. That is what I meant when I wrote about the "voicing filter."
__________________
Homo doctus semper in se divitias habet.
  #6  
Old 12-06-2005, 06:30 AM
bolo's Avatar
Steve Boletchek
 
Join Date: May 2005
Location: Apex, NC and Woolwine, VA
Supporting Member
Quote:
Originally Posted by DRURB
If it is boomy, a high-pass filter will likely do you no good. The "boomy" region, as it is perceived, is usually well above the lowest frequencies that you do want to reproduce. So, a high-pass filter set to tame the boomy region, would attenuate those low frequencies even further.
DRURB, are you saying that "boominess" lurks in say like the 150-165 Hz region? I associate that region with "resonance" moreso than "boominess" in my head and my ears.

Isn't it fun (?) sometimes trying to use words to describe sound, tone and timbre?
__________________
"Why can't you just dig what you dig without having to dis everyone else?" - IYAMNI
  #7  
Old 12-12-2005, 09:34 PM
drurb's Avatar
Oracle, Ancient Order of Rass Hattur
 
Join Date: Apr 2004
Location: Connecticut
Supporting Member
Quote:
Originally Posted by bolo
DRURB, are you saying that "boominess" lurks in say like the 150-165 Hz region? I associate that region with "resonance" moreso than "boominess" in my head and my ears.

Isn't it fun (?) sometimes trying to use words to describe sound, tone and timbre?
Well, yes, more or less. I think of "boomy" as being the result of a peak in response certainly no lower than 150 Hz. That's why I said that id one employed a high-pass filter to attenuate those frequencies and higher, one would kill the precious low end.
  #8  
Old 12-13-2005, 03:02 AM
Guest
 
Join Date: Jul 2005
stat-pre usage

Dunno if this will help any, but I have been playing around with the relative amp & stat-pre volume levels for a while. I found that having more level from the stat-pre (ie 2 or 3 o'clock as opposed to 12) and less gain from my amp gives better results. Basses and amps vary etc, but you might get something from it even if it doesn't solve the "boom". I seem to recall playing my last bass with the stat-b etc thru a GK and not liking it over much. Can't recall why though, so no help!
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Follow TalkBass on Twitter   Visit TalkBass on Facebook  

All times are GMT -6. The time now is 11:47 PM.




Copyright 2011 Talk Music Group Inc. All rights reserved.
Play guitar? Visit our new sister site TalkGuitar.com [beta]
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.