Looking for power supply for Behringer mixah

ynie92992 · #1 07-03-2010, 12:34 AM

http://www.pssl.com/Behringer-000-97...0-Power-Supply
This is the precise power supply that I need for my modest little mixer. I do not understand why it is so durned expensive compared to the other supplies though.It's more expensive than the mixer itself! Does any one know where this supply can be had for about 30 dollars or so? I already tried Sam Ash and the shipping was over the month, and I need to get into recording some things soon.
Any help would be greatly appreciated.

ynie92992 · #2 07-03-2010, 02:57 AM

bump bump
This is considered "Recording Gear and Equipment" right?

jimmy.timms · #3 07-03-2010, 06:57 AM

Try Sweetwater. They stock some Behringer parts. Most Behringer parts are pretty expensive.

ynie92992 · #4 07-03-2010, 07:13 AM

Thank you much Mr. Jimmy, but Sweetwater does not carry Behringer. The thing is, I got a power supply for the exact same mixer from Sam Ash a while ago, and it was 30 dollars. The problem was that shipping was about 1 month and a half.

chaotick · #5 07-03-2010, 07:14 AM

I had the same problem, with a behringer 6 input mixer: broken PS.

I guess it's a common problem because I kept a watch on craigslist and kept seeing mixers with no adapters showing up.

It sucks but unless you can find a similar unit on craigslist, ebay, or somewhere used it COULD be cheaper to buy a new one.

ynie92992 · #6 07-03-2010, 07:20 AM

Okay, I understand. But why is it that a couple of particular Behringer PS's are 5 times the price of the other ones?

jimmy.timms · #7 07-03-2010, 07:30 AM

Sorry about the Sweetwater link. It's one of those big boxhouses that had those. The retail side of the shop I work in carries Behringer. The parts can be aggravating to get and are often pricey. Behringer's support chain seems to be setup to provide warranty replacement of the whole device pretty quick. I assume they have a lot of experience with that. Parts are another story. It took two months recently recently to get a 10" driver for a bass cabinet. None of the power supplies may be in country at the moment.

projectMalamute · #8 07-03-2010, 08:44 AM

What do you need in terms of voltage and current?

I suspect you will be able to find something that fits the bill for less money.