Quote:
Originally Posted by unity bass I just bought a Fostex MR-8 HD and I want to capture the gigs and practices I have with my band.
I'll probably take a mix from the board at our gigs but usually the easiest thing to do will be set up live mics in the room.
I've heard that two mics in an X-Y pattern gives a better recording than a single mike but, of course, that doubles my cost.
I've seen stereo mics but I don't even know if they apply to what I'm trying to get at.
So, please keep in mind that I'm basically a hobbyist taking my first go at recording and I'd like to keep it under $100.00.
So, what mic do you recommend for capturing live performances?
Is this anywhere close to what I'm looking for? http://www.zzounds.com/item--MSEMXLANVPK
or this? http://www.zzounds.com/item--AUTAT2041
I appreciate the help,
Chad |
I'd actually opt to go for the first pack, but break your budget and buy two of them...that way you have a matched set of each - and you're going to need mic stands too.
As for placement - it sounds like your just going to record the band as if it's playing on stage (not sending each instrument to a mixing board, but just recording the sound as it's being made). You'll have to get about 3 - 5 feet in front of the band (so if there's a stage with a mosh pit - none of these suggestions will work).
Take the larger diaphragm ones and place them about a foot and a half off the ground (ground being the floor the band is performing on). They should be placed near the center of the band, with the one on the left pointing to the right and the one on the right pointing to the left so that they form a "V". (Forget this if you're using stage monitors, though)
Take the others two more tubular ones and place them higher in the "field " to capture the cymbals, vocals and lead instrument work - same positioning. Experiment with the different heights. Of course, you'll need a four channel mixer too.
This type of recording isn't the best by any means. Be careful if you're playing in a rectangular room for any feedback waves at a particular frequency level. That'll destroy a recording miked this way.