Recording Active Bass Problems
I'm working on recording my bass to existing mp3s (with bass). I'm using a Tascam DP008 and one of two active Ibanez basses. when recording, I find that I have to keep the level of the mp3 (tracks 1 & 2) quite low in comparison to my bass to be able to hear it in the "mix". For example the volume knobs for the mp3 are at 10-11 o'clock while the bass is at 4-5 o'clock. I have the trim setting just below the point where I get distortion to keep the signal clean but I wish I could get a little more sound from my bass signal. I have the following settings available on the Tascam:
External Line Low
External Input Mid
External Input High
Right now I'm using the Guitar input with the External Input Mid setting to get the best sound. I have the volume on my bass slightly under max and have played through my 4x10 cabinet as well as 3 different sets of headphones. The manual says to use the mic/line input for active basses but as I said, I'm having the best luck with guitar and the external line mid setting.
Any suggestions on getting more sound out of my bass in the mix?
i can probably help, but it would be better if we talk via skype, so I can give you a walkthrough the steps you need to take. send a PM if you're interested.
|All times are GMT -6. The time now is 11:30 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.