Hi,first , I must say great site,stare at screen till my eyes bleed Im building a 32 scale fretless single cut and have bridge and pu questions.planing aalmost flat radius & want to use a hipshot a series with raised a&d saddles.problem? for pups thinking MM rear J neck but lookin for opinions on this.Thanks in advance
Hi,first , I must say great site,stare at screen till my eyes bleed Im building a 32 scale fretless single cut and have bridge and pu questions.planing aalmost flat radius & want to use a hipshot a series with raised a&d saddles.problem? for pups thinking MM rear J neck but lookin for opinions on this.Thanks in advance
As far as the bridge goes, I use a flat fingerboard on almost all my builds and have had no problems using hipshot A style bridges with the pre-curved base profile ...you just raise the outer saddles a bit more to compensate.
Good luck!
__________________ don't ask me what wood produces XYZ tone ...I JUST DON'T KNOW! http://www.ramirezbass.com got mid-hump®?
i am going though the same issue. i wanted my singlecut to have no radius, but the schaller bridge i ordered, has the top of the base plate radiused, so i am considering making the fingerboard radius match, to simplify set-ups
__________________
some day, i will be more intelligenter!
so,Iwould guess i should measure the middle saddel height when adjusted down and set the neck pocket depth so i have the same height above body to the top of fretboard?
Im building a 32 scale fretless single cut and have bridge and pu questions.planing aalmost flat radius & want to use a hipshot a series with raised a&d saddles.problem? for pups thinking MM rear J neck but lookin for opinions on this.Thanks in advance
