Quote:
|
Originally Posted by givmefire401 How do u post tabs?  |
Tabs are generally created in simple ASCII format which works great
for ASCII editors like Notebook.
However, in order to post Tabs properly on the Boards
a bit of formatting is required.
Post using
New Courier Font or
Code format and everything will line up.
Use 'Size=1' to make longer Tab fit.
Courier Font kearning, etc... matches up with ASCII.
Use it if your transferring Notebook created Tab to MSWord.
Examples: Plain cut and Paste ASCII looks like this --
Kearning Shifts with Characters and Open Spacing (Notice the :Colons). This example uses Font Size 1
|-7-5-4------------------------------------------|
|--------7-5-4-----------------------------------|
|--------------7-5-4-------------2-/7\--------0--|
|---------------------7-3\-0-/3----------3-------|
: : :
pull off.................: : :
: :
hammer on...................: :
:
slide up then down.................:
In Courier Font ACSII tab looks like this --
Proper Character Kearning but Kearning Shifts with Open Spacing.
This is usually the Standard way to Post tab
because most tab do not contain Open Spacing.
|-7-5-4------------------------------------------|
|--------7-5-4-----------------------------------|
|--------------7-5-4-------------2-/7\--------0--|
|---------------------7-3\-0-/3----------3-------|
: : :
pull off.................: : :
: :
hammer on...................: :
:
slide up then down.................:
Using CODE tags also align ASCII and other stuff.
This time Proper Character & Open Space Kearning. Code:
|-7-5-4------------------------------------------|
|--------7-5-4-----------------------------------|
|--------------7-5-4-------------2-/7\--------0--|
|---------------------7-3\-0-/3----------3-------|
: : :
pull off.................: : :
: :
hammer on...................: :
:
slide up then down.................: Notice how Open Spaced :Colons are now properly justified and kearned.
