For the Cirrus Fans

[IotaNet]

All -

I decided to bite the bullet and buy a Millennium preamp for my Cirrus but I cannot find the installation instructions on TB. I've tried searching/googling various word combos but the closest I can find is the thread where the pre is installed into a Peavey G-Bass.

Does anyone have the link to the Millennium preamp into Cirrus thread?

Thanks!

[finn74]

It not differcult at all. The pre amps are basically identical with the exception of the varible mid-range for the Millenium. I think there are to 2 wires to the batteries and 3 others. Just remember were each wire goes. I've done it twice.

[NicJimBass]

One other thing you will have to do is make the hole for the mid controls slightly bigger. A basic drill with the correct bit will do just fine. Otherwise, yes, pay attention to where the wires are on the pre you're taking out and solder them to the same spots on the Mill pre.

[MNAirHead]

The gbass one works - simple swap bring it over