Club Cort - Take 2

[Bass Dawg]

Heya, MadMark5 started The Cort Club!!!! way back when, but membership numbers have not been dished out for some time.

Taking into account that there are a lot of faithful Cort owners on TB, I thought that I'd better pull my finger out and start Club Cort to ensure that we all have a number to reference in our respective signatures!

So post a pic of you Cort Bass(es) and I'll send you a number faster than fart after Mexican banquet.....

Peace Out!

** As requested here is the link to "The Cort Club!!!" that was created by MadMark5 - The CORT Club!!! **

[Alvaro Martín Gómez A.]

You can see plenty of pics of mine in this thread (also featured in my current avatar).

[Dams]

Hi,

I'm Damien (I was number 47 in Cort club part 1, wait now for a new number here).
These are my Corts : ActionBass and C4H



Bass_Dawg : would you please place the link of Cort club part 1 (The CORT Club!!!) in your first post, it could be useful ?

[Orangeclawhamme]

Here's my GB 34a

[MosGuy]

If it was me I would take the initial list that was posted from the Cort club. Then start assigning from those who requested numbers in the original. Plus possibly ask existing members to PM you to fill in blanks. The trouble with starting fresh as you've appeared to have done. Is that there will be overlap and conflicting numbers from the two clubs.

[Bass Dawg]

Originally Posted by MosGuy

If it was me I would take the initial list that was posted from the Cort club. Then start assigning from those who requested numbers in the original. Plus possibly ask existing members to PM you to fill in blanks. The trouble with starting fresh as you've appeared to have done. Is that there will be overlap and conflicting numbers from the two clubs.

I was initially going to do that but the communication of the membership numbers must have been done by PM, as there is no record of them being assigned on the original thread.

Can those who got numbers from MadMark5 please PM me with their membership details so I can construct one Cort Club membership list.

Thanks

Thanks

[MosGuy]

Yeah I understand the numbers were assigned by PM. There was an initial list posted in the original thread on page 12 as a starting point. As you've already done request current members to send their numbers. While waiting what I'd likely do is go through the thread and start listing names. Perhaps leaving a wide enough gap and assign temp numbers #200-300. After waiting a week or two for current members to respond. Then back fill the list where the original numbers seem to leave off. It's rather time consuming unless you could somehow get a more current master list off Mark. To me that seems the only decent solution, otherwise the club will have conflicts. I did think about taking on the task myself a few times. But never seemed to get around to it.

Best of luck getting the list updated. My number is in my sig.

[Bass Dawg]

Originally Posted by MosGuy

Yeah I understand the numbers were assigned by PM. There was an initial list posted in the original thread on page 12 as a starting point. As you've already done request current members to send their numbers. While waiting what I'd likely do is go through the thread and start listing names. Perhaps leaving a wide enough gap and assign temp numbers #200-300. After waiting a week or two for current members to respond. Then back fill the list where the original numbers seem to leave off. It's rather time consuming unless you could somehow get a more current master list off Mark. To me that seems the only decent solution, otherwise the club will have conflicts. I did think about taking on the task myself a few times. But never seemed to get around to it.

Best of luck getting the list updated. My number is in my sig.

Thanks MosGuy, after leaving my last post I spent a looooooong time going through all 43 pages of Mark's original thread.

I got the list off page 12 but also scanned every sig for club numbers. I am about to post the list that I have constructed, and instructions for non-members to get a number.

[Bass Dawg]

As I have already outlined, I have gone through the original Cort Club thread and have put together a list of all of the current members that I could locate.

If you have a membership number and are not on the below list then please PM me and I will update the list and post again on this thread.

If you previously posted pics on the original thread and didn't get a number, or would like to join the club, then please post your pics on this thread and I will assign you a membership.

I will most likely wait a week or so before I start assigning new numbers to try and avoid dishing our memberships that have already been allocated.

Here is the list -

1 MadMark5
2 vindy500
3 BassIsFun17
4 emils
5 Spinner
6 Ste_m3
7 Luke73
8 jumbosilverette
9 Fenderjazz6823
10 Earwigger
11 MrWalker
12 CraigG
13 milo
14 stingray69
15 Metalhead119042
16 The Duke
17 Jublian*
18 luzceloffan
19
20 12stringbassist
21 HESEL
22 perogato02
23 saxnbass
24 Robear22
25 KageOnBass
26 FL Knifemaker
27 LyonsBass
28 GoesThump
29
30 Wasp
31 Kephah
32 IngerAlb
33 superflybass
34 dezspet
35 aspdevboy
36 Darkstrike
37 MosGuy
38 jinithith2
39 jcburn
40 Vladpire
41
42
43
44
45 rick4001s
46
47 Dams
48 Mike11121
49
50
51
52
53 FLEABASS
54 4$$
55
56
57
58
59
60 Bass Dawg
61 Alvaro Martin Gomez A.
62 Orangeclawhamme
63 SnakeKappele
64 BDL1991
65 JohnnyB53
66 redironman
67 theo64
68 codycaz
69
70

Those on the current list to receive membership -

Nil

[SnakeKappele]

Here for my membership number .


Love my Corts. Here is my mahogany B4FL:



I bought it used, swapped out the MK1 pickups for MK4s and replaced the electronics with a Bartolini 5.2 A/P. I also made an ebony "ramp" that I installed between the neck and neck pickup.


Here is my swamp ash B4FL:



I swapped the MK1s for MK4s, replaced the electronics with a Bartolini 5.4 A/P. I made an ebony "ramp" that I installed between the neck and neck pickup. I installed two DP3T switches so I can select single coil, series, or parallel wiring for each pickup. And I put wenge knobs on it.

[Bass Dawg]

Originally Posted by SnakeKappele

Here for my membership number .


Love my Corts. Here is my mahogany B4FL:



I bought it used, swapped out the MK1 pickups for MK4s and replaced the electronics with a Bartolini 5.2 A/P. I also made an ebony "ramp" that I installed between the neck and neck pickup.


Here is my swamp ash B4FL:



I swapped the MK1s for MK4s, replaced the electronics with a Bartolini 5.4 A/P. I made an ebony "ramp" that I installed between the neck and neck pickup. I installed two DP3T switches so I can select single coil, series, or parallel wiring for each pickup. And I put wenge knobs on it.

Nice basses and thumbs up for the mods. I have added you to the list and will post you membership number shortly.

[Bass Dawg]

Originally Posted by Orangeclawhamme

Here's my GB 34a

Love it mate! GB34A was my first bass and I still have it. It's my daily workhorse.

[Bass Dawg]

Originally Posted by Dams

Hi,

I'm Damien (I was number 47 in Cort club part 1, wait now for a new number here).
These are my Corts : ActionBass and C4H



Bass_Dawg : would you please place the link of Cort club part 1 (The CORT Club!!!) in your first post, it could be useful ?

Heya Damian. Nice to meet ya mate. Nice axes! If you ever want to give em away then PM me and I'll send you my address! lol

You will remain as #47.

[Bass Dawg]

Originally Posted by Alvaro Martín Gómez A.

You can see plenty of pics of mine in this thread (also featured in my current avatar).

Go the Gene Simmons axe! Will post your membership number shortly.

[MosGuy]

SnakeKappele: Those are sweet looking B4FL's. I really like the look of the wenge knobs. Do you recall where you got them ?. I might like to do the same mod to my ash B4FL.

Bass Dawg: Good work thus far, I know it's a ton of work. Probably why I kept procrastinating with the plan myself. You've done the worst bit of it though

[Dams]

Originally Posted by Bass Dawg

... Nice axes! If you ever want to give em away then PM me and I'll send you my address! lol

Well ... I believe I'll keep them for a long time I plan to upgrade their pickups (DiMarzio DP126 or SeymourDuncan SPB2/SJB2 for the Action, and SeymourDuncan SMB4 for the C4H).
I also hope I can quickly buy them a little sister : a GB74 OPN, which is an amazing bass.

Originally Posted by Bass Dawg

You will remain as #47.

OK. Thank you.

[BDL1991]

Here's my Cort T75, Black cherry with quilted maple top, EMG 40-HZ and EMG B30 RevS Three Band EQ, all stock, sounds brilliant when dialled in right, though can cover alot of tones

[rick4001s]

Hello
I was number 45 in the last Cort Club thread. Thanks!

[JohnnyB53]

Originally Posted by SnakeKappele

Love my Corts. Here is my mahogany B4FL:



I bought it used, swapped out the MK1 pickups for MK4s and replaced the electronics with a Bartolini 5.2 A/P.

I too have a mahogany B4FL. It was an older one, so I swapped out the stock Mighty Mite active soapbars and controls for USA Bartolinis (CF4CBC's) with matching preamp and harness.



And I too breathlessly await my Cort Club number.

[Bass Dawg]

Originally Posted by Dams

Well ... I believe I'll keep them for a long time I plan to upgrade their pickups (DiMarzio DP126 or SeymourDuncan SPB2/SJB2 for the Action, and SeymourDuncan SMB4 for the C4H).
I also hope I can quickly buy them a little sister : a GB74 OPN, which is an amazing bass.




OK. Thank you.

GB74 is a nice bass. I'm GASing for either a GB94 or 95, I haven't decided yet. Gotta love tha Corts!