Originally Posted by jcanderson
With the exception of masking tape to mask off the fretboard, what is shown in that first post is what I wound up using.
I had also purchased some metal fret masks (not sure of their proper name) from StewMac to protect the fretboard when leveling single frets, but I abandoned them and went instead with the masking tape when I decided to go in with the 8 inch leveler.
StewMac might also have a video on how to use a leveler. If so, I'll add it to the blog post tomorrow.
I might also recommend a small file for leveling single frets, but I'm thinking that the 8 inch leveling bar might work fine there, too.
Thanks, I've been wanting to work on my MIM's fret board. While I have researched some, I liked what appeared to be a pretty comprehensive list of what's required.
Thanks again, and great job again also!