Go Back   TalkBass Forums > Bass Guitar Forums > Bass Guitar Forums > Basses [BG]
Register Rules/FAQ/CUP Members List Search Today's Posts Mark Forums Read



Supporting Membership
Thank You

Latest Supporting Member
Donate to Upgrade Today

Reply
 
Thread Tools Search this Thread
  #1  
Old 03-16-2007, 06:13 AM
Registered User
 
Join Date: Mar 2007
Location: Sussex, England
Question Hohner Headless Bass - Do you know the history?

Just purchased an active black B2A Hohner headless bass guitar. I've played a stock rosewood board USA Fender Precision for some time. The Hohner is fantasic. Easier to play as it is light and small and a very, very good sound. You can't replace the growl of a Precision though. Anyway, does anyone know anything about the history of these bass guitars. I see that my hero (JJ Burnel of the Stranglers) played one in the early eighties. I used to think it was a Steinberger that he played, but apparently not! The one I've got is an older model (I wouldn't be surprised if it was from the eighties) - although it is in very good condition. Curiously, the pickups have Hohner stamped on the front rather than the newer one's which have EMG Selects. I suppose that is a good thing. I've had a look at the Hohner site and it there is no historical data on there. I've also looked round the web with no luck. Also, I took the thing apart to clean it and couldn't find a serial number anywhere. Am I missing something? Any info you have would be appreciated!

Last edited by mercuryl : 03-16-2007 at 06:15 AM. Reason: Poor spelling
  #2  
Old 03-16-2007, 08:21 AM
A9X A9X is offline
Registered User
 
Join Date: Dec 2003
Location: Sinny, Oztraya
What history are you looking for? The designs were licenced from Ned back in the day and they're made from maple in Korea. Very good basses for the price.
Neither of mine have serial numbers.

I have a B2ABD and a B2V as well as an XL2A
__________________
No matter how far a jackass travels, it won't come back a horse.
  #3  
Old 03-16-2007, 08:28 AM
Registered User
 
Join Date: May 2006
Location: Land of Lakland
I've had two Hohners headless in the past. Both were B2A. The one from 1985 was a fretless prototype which had EMG selects that I got from the sales rep after the NAMM show, and the other was a fretted model from 1986 with EMG selects. both of them had serial numbers stampped in the battery door. I've seen the models with "hohner" on the pickup, but they all from the late-'90s.

GM
  #4  
Old 02-04-2012, 10:46 PM
Registered User
 
Join Date: Apr 2011
Location: Camas, Washington
No SN on mine(( its red and has hohner stamped on the EMGs in gold.

Dont know if a picture of the battery cavity helps
Attached Thumbnails
Click image for larger version

Name:	photo.jpg
Views:	55
Size:	165.9 KB
ID:	249372  
__________________
Rickenbacker Club #429
  #5  
Old 02-05-2012, 01:00 AM
Registered User
 
Join Date: Dec 2007
Location: New Zealand
JJ B did play a Steinberger

(I'm not saying he didn't play a Hohner btw).

I had a B2A which was a good value bass. The active switch was far superior tot he passive mode. Normally it's the other way around with cheap(er) instruments

the serial number was on the inside of the battery plate

not within cooee of my L2 but IMO a 'better' instrument than the Cort and Ibanez Steinberger copies.
  #6  
Old 02-14-2012, 11:29 AM
Registered User
 
Join Date: Jul 2011
Location: Madrid - Spain
I've got the fretless model, I bought it in 1990 or 1991, but I am 99% sure it has the EMG pickups. Cost the equivalent of 450...500$.

Very good for the price (aesthetics, action and specially flexible sound). So-so in ergonomics, it looks small but it is 34', and it is balanced in a way that first position is far from the body. But neck is narrow and confortable for me, and playing at home (sitting) it is fantastic.

I broke it 3 years ago, I rushed to set it up after long time not playing. I broke the trussrod. It is difficult to repair in this model, neck-through and with the plastic fingerboard probably epoxied to the neck (no way to unglue). The only solution was to remove the ebonol fingerboard (a kind of plastic with VERY good sound), replace the trussrod with a modern double-action one and build a new fretless ebony fingerboard. I paid again 450...500$ (350€) for the repair, I was sure I could not get a bass like this for this price. AFter this I even invested another 50€ in a good foam gigbag for it (that is useless for any other instrument).

The sound is different, warmer. Plastic gives in my opinion more "muah" than ebony. And the instrument had to come back to the luthier due to some problem too long to mention here (basically a good idea when repairing resulting in an unpredictible side effect). But today it is like new,I like it very much and I keep it.

I also have 2 peavey Cirrus-5, fretted and fretless, BXP and Custom Shop. I prefer to play the Cirrus because due to balance their 35´scale "feels" shorter than the Hohner (first frets closer to my body), but sound is comparable in quality and versatility.
  #7  
Old 02-14-2012, 01:56 PM
RG RG is offline
Registered User
 
Join Date: May 2000
Location: central Illinois
I dont have the bass you have but I do have a B2B which is passive and has the P/J pickups. I used to have a Steinberger Synapse and I like this, which is less $, much better. The only thing I didnt like was the way it hung to far to the left, so I made a strap extender (just a small piece of metal) to simulate an upper horn on a bass with a traditional body. I think you can buy extenders too. Just my two cents.
  #8  
Old 02-14-2012, 02:30 PM
Registered User

Endorsing Artist: Hiwatt UK
 
Join Date: Sep 2006
Location: Buenos Aires, Argentina
I own a Jack Bass Custom V. I know it was built by Cort factory in Korea.
Reallly good bass though very underestimated and underrated.

The serial number is on the inside of the battery plate
__________________
AlX
Amp: Hiwatt Custom 400 / Basses: 1978 Fender P. - Hohner The Jack Bass Custom V
  #9  
Old 02-14-2012, 02:32 PM
ian_s's Avatar
Registered User
 
Join Date: Jul 2009
Supporting Member
I also have a B2B, used from GC for around $200. Wonderful for travelling, it fits in the overhead luggage bin. I like that it has the headless, L2 design, but that it's solid maple and passive PJ for great sound.
__________________
Fodera club | SX club member in good standing | Headless club #51 | Carvin BX500 + 2xBFM Jack 10 =
  #10  
Old 02-14-2012, 04:20 PM
Registered User
 
Join Date: May 2008
Location: Texas Gulf Coast
I don't know the history ,but I've got the passive Hohner B2B that I picked up about 2 yrs ago in a pawnshop for $58. It's a nice little quick grab practice bass.Here's mine.

__________________
Fender Jazz Club# 810,The Roger Waters P-Bass Club #5,Fender P-Bass Club # 859,Fender FSR Club #5
  #11  
Old 02-14-2012, 08:30 PM
Registered User
 
Join Date: Dec 2007
Location: Gastonia, NC
Mine is a black B2A with the Steinberger DB, active, stacked knob, toggle switch and light and adjustable preamp on back cover along with fold down Steinberger piece for sitting and playing. Dual soapbox PUs. Lots of horsepower. No serial number that I can find.
__________________
You Can't Have Too Much Bass.
  #12  
Old 12-16-2012, 08:41 PM
Registered User
 
Join Date: Dec 2001
Location: East of St Louis, in IL
I know this is an older thread, but...

I just dug out my B2B, after my recent house move, good times. I had the same issue with how far the neck hung, but I did acquire the strap arm hook thing for a Steinberger and used a dremel to create a shallow slot on the back of the body for the new part, it's perfect now. I did have to mod my hard case as well but that was easy. I recommend this method!

Next mod is an EQ, but I need to figure out the parts to get the 4-knob EQ down to 3... More good times ahead! I have to agree that these are nicely made basses for a great price. I had the 5 string version before, pretty good as well

Last edited by wardak : 12-16-2012 at 08:44 PM.
  #13  
Old 12-16-2012, 08:44 PM
two fingers's Avatar
Registered User
 
Join Date: Feb 2005
Location: Greenville, NC USA
Send a message via Skype™ to two fingers
Supporting Member
I had an old Cort one way back when. I think they were made at the same place. Mine was actually a really good little bass. I grabbed it as much as I did my Kramer back then. (Gimme a break. It was the 80's.)
__________________
If you're gonna be stupid, you gotta be tough. - My Grandmother
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Visit TalkBass on Facebook   Download our iOS app   Download our Android app

All times are GMT -6. The time now is 05:36 AM.




© 2012 Talk Music Group Inc. All rights reserved.
Play guitar too? Visit TalkGuitar.com
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.