Pedulla Pentabuzz NTMB Trim Pots
Just thought I'd post this info from Christine at Pedulla.com... it's about the trim pot settings of Pedualla Pentabuzz basses with the Bartolini NTMB electronics...
To answer your questions regarding the trim pots in our NTMB system in the PentaBuzz model:
The trim pots on the mini toggle switch adjust the amount of boost & cut and the trim pot on the back of preamp module adjusts overall gain.
To set the trim pots to our default settings, use a small screwdriver to turn each of them fully counter-clockwise, then turn them clockwise until they are each at the position listed below:
- Overall gain (Trim pot that is by itself on the back of a module): 2:00 position
- Mid boost (Trim pot on the mini toggle, furthest from bridge): 12:00 position
- Mid cut (Trim pot on the mini toggle, closest to bridge): 9:00 position
|All times are GMT -6. The time now is 08:58 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.