SX Ursa 6-string Jazz bass - Page 4

dabbler · #61 07-29-2010, 05:39 AM

Quote:

Originally Posted by bassbenj

Ya got me! Yeah, I'm one of the buyers. I noticed someone else ordered one ahead of me. I was waiting to see what the "questions" for Kurt were, but GAS got the best of me! I have just spent too much time here at TB looking at the Low End 6 string Fender Ad to the left of this text! I have nothing even moderately "Fender-like" in a 6 string. I have no 6 string "bar basses". And the price was so low I HAD to give in. (Got the tweed case too! I always get the case as they ship better and basses are better protected going to the gig than in gig bags)

But give me some credit! I really wanted to order TWO of them! The plan, of course, would be to take the frets out of one and end up with fretted and fretless Fender-like "bar-bass" six strings. But I didn't want to go too wild so I played it conservative and got one to look at first. If I love it (or even if it's moderately Fenderish-OK) I'll then get another and which ever one has the crappiest frets will become the fretless!

Naturally now I'm in "waiting for new bass day" mode.

PS. while searching 6 string basses as a result of Bass GAS I took one more look at the Bongo SH 6 string. Gads! That is one fine "must have" bass! I'm dying to own one! However, given that the price is a mere TEN TIMES that of the SX I think it will have to wait...

Hi everybody, My name is BassBenj and I'm a bassoholic!

I too saw that 2 had been bought but JZ beat me to asking who. I'm anxiously awaiting your review, as well as the definitive answer to the question most of us want to know, "What IS the string spacing."

If your review is favorable (which I strongly suspect it will be), I will be facing a difficult decision. I want one, no question about it, but ummmm, I'd like one in LPB (that should come as no surpise to anyone who has seen my sextuplets). However, I know that sometimes new and unusual models show up on Rondo and as soon as people find out that they are good, they QUICKLY get bought up! I have missed out on some of those models, and have learned my lesson. So, I will have to decide whether to wait and see what other colors are coming, if any, or get one immediately before they are all gone.

Starflyer59 · #62 07-29-2010, 06:50 AM

Can you post pictures and clips through a LMIII and a 1X12 Cab, Flatwound Strings, a wireless shure system and new Jazz Pups and Pots???

Just Kidding

Allen_VA · #63 07-29-2010, 07:39 AM

Quote:

Originally Posted by bassbenj

And then figuring it a different way. I took neck width at nut of 2.125 and a neck width at 12th fret of 2.9375 and calculated what that width would be at the bridge and came out with about 3.75 inches. Now that would be the width of the WHOLE bridge not the strings width. So 3 3/4 is not unreasonable if string width is 3.2 inches. This does not seem to have 1/2" spacing at the bridge no matter how you figure it.

Of course I could be wrong... Those answers come back from Kurt yet?

I did the same calculation you did. You know the NECK width at the nut and the NECK width at the 12th fret, you can extrapolate approximately what the "NECK" width would be at the bridge. You lose around 0.1" of neck on the outsides of each outer strings, leaving you with approximately 3.55" string width at the bridge. Divide by 5, you get ~0.71 or about 18mm string spacing at the bridge. I didn't take into account the thickness of the strings, so this amounts to a "center-string to center string" spacing rather than the gap distance between strings. Actual string gaps from string to string will be more like 17 to 17.2mm probably.

Now, once I buy one of these badboys and put calipers to the actual strings we'll know for sure!

Allen_VA · #64 07-29-2010, 11:05 AM

I emailed Kurt about these 6-string basses. He said he didn't expect to get any other basses of this type in this year, e.g., no different colors, fingerboards, inlays, etc.

Hopefully those of you who picked up one of these basses from Rondo will share your experience with this instrument.

SMG · #65 07-29-2010, 10:25 PM

"I too saw that 2 had been bought ..."

Curiosity...how can you tell?

MyWifeBoris · #66 07-29-2010, 10:31 PM

I saw this a couple days ago. I SERIOUSLY want one of these. Might be my first sixer.

MikeBass · #67 07-29-2010, 10:34 PM

5 string with a sixth string added with spacing like that!

letsrumble · #68 07-29-2010, 11:06 PM

Quote:

Originally Posted by SMG

"I too saw that 2 had been bought ..."

Curiosity...how can you tell?

If you put a high quantity in your cart, say 100, you will get an error message that tells you how many are left in stock. Right now there are 17. My guess is they checked right when these got in, and again later on.

dabbler · #69 07-30-2010, 03:21 AM

Quote:

Originally Posted by letsrumble

If you put a high quantity in your cart, say 100, you will get an error message that tells you how many are left in stock. Right now there are 17. My guess is they checked right when these got in, and again later on.

That's right! But if you do this, be sure to clear your cart after you get your answer.

Figbassist75 · #70 07-30-2010, 12:55 PM

Quote:

Originally Posted by bassbenj

Ya got me! Yeah, I'm one of the buyers. I noticed someone else ordered one ahead of me. I was waiting to see what the "questions" for Kurt were

The only two questions I asked Kurt were how did the SX Ursa 6'er compare with the Douglas WOB 826 I had purchased a few months ago and if the 1/2inch string spacing was correctly listed. In his reply that I posted on this thread earlier he confirmed the 1/2 saying it was a little less than 18mm. Looking back at my post where I copied and pasted his email reply, I now see where everyone is confused on the spacing. He must have meant 13mm instead of the 18mm he typed. Which would make sense seeing that 1/2 inch spacing would be closer to 13mm than 18mm. It was a typo. I apologize for the confusion everyone.

Allen_VA · #71 07-30-2010, 01:25 PM

Quote:

Originally Posted by Figbassist75

The only two questions I asked Kurt were how did the SX Ursa 6'er compare with the Douglas WOB 826 I had purchased a few months ago and if the 1/2inch string spacing was correctly listed. In his reply that I posted on this thread earlier he confirmed the 1/2 saying it was a little less than 18mm. Looking back at my post where I copied and pasted his email reply, I now see where everyone is confused on the spacing. He must have meant 13mm instead of the 18mm he typed. Which would make sense seeing that 1/2 inch spacing would be closer to 13mm than 18mm. It was a typo. I apologize for the confusion everyone.

What was the actual string spacing of your new Douglas? How do you feel about a 1/2" string spacing at the bridge? That seems pretty tight and definitely contradicts the estimate I came up with earlier, so maybe there's another typo in the online listing somewhere...maybe it's 2 15/16 at the 20th fret instead of the 12th fret as the listing seems to indicate.

Thanks for the input!

dakpluto · #72 07-30-2010, 02:24 PM

I'm like 80% wanting to get one, but I just really want a "for sure" on the spacing first :\

Figbassist75 · #73 07-30-2010, 05:31 PM

Quote:

Originally Posted by Allen_VA

What was the actual string spacing of your new Douglas? How do you feel about a 1/2" string spacing at the bridge? That seems pretty tight and definitely contradicts the estimate I came up with earlier, so maybe there's another typo in the online listing somewhere...maybe it's 2 15/16 at the 20th fret instead of the 12th fret as the listing seems to indicate.

Thanks for the input!

You are welcome for the input. The Douglas is 11/16 at the bridge and is tight, especially if you are like me and came from playing exclusively 4 stringers. It took me about three weeks of hard practice to get used to the neck width and string spacing.

It's a hard decision for me as far as a second 6'er goes because of how good of a bass the Douglas is for the money. Without testing the SX URSA 6'er, I'll have to say the Douglas WOB 826 is one of the best low end 6'ers out there. It's hard for me to lay it down now for another six string. But I do need a back up for it and may pull the trigger on the SX URSA sometime soon. With Rondo's prices and their awesome return policy, you can't really lose at all.

Tommygunn · #74 07-30-2010, 05:42 PM

2 truss rods?

JZQuantum · #75 07-30-2010, 07:51 PM

Quote:

Originally Posted by dabbler

I too saw that 2 had been bought but JZ beat me to asking who. I'm anxiously awaiting your review, as well as the definitive answer to the question most of us want to know, "What IS the string spacing."

If your review is favorable (which I strongly suspect it will be), I will be facing a difficult decision. I want one, no question about it, but ummmm, I'd like one in LPB (that should come as no surpise to anyone who has seen my sextuplets). However, I know that sometimes new and unusual models show up on Rondo and as soon as people find out that they are good, they QUICKLY get bought up! I have missed out on some of those models, and have learned my lesson. So, I will have to decide whether to wait and see what other colors are coming, if any, or get one immediately before they are all gone.

Dabbler,

What are some of those Rondo basses you missed out on?

JZQuantum · #76 07-30-2010, 08:07 PM

Dang it...I'm sold.

dabbler · #77 07-30-2010, 10:10 PM

Quote:

Originally Posted by JZQuantum

Dabbler,

What are some of those Rondo basses you missed out on?

Ummm, lte's see, the SJBs with the rosewood blocked neck (or was it just a separate rosewood blocked neck, whatever it was, I snoozed and losed), I missed out on the matching headstock LPB SJBs the first time around, and the natural SJB LTDs. That's all I can remember right now. Why do you ask?

Senator · #78 07-30-2010, 10:29 PM

This will definitely be next on the list once I see/hear reviews.
I don't mind the spacing.

dabbler · #79 07-30-2010, 10:55 PM

Quote:

Originally Posted by Tommygunn

2 truss rods?

Yeah, every sixer I've had had dual rods (and they all came from Rondo).

Figbassist75 · #80 07-31-2010, 04:08 AM

Quote:

Originally Posted by dabbler

Yeah, every sixer I've had had dual rods (and they all came from Rondo).

Dabbler, your posts about the Douglas WOB 826 convinced me that it was a good 6'er and you were right about it. I love that bass, my only mods, if you call them that were a new set of Ernie Ball strings and she was good to go.

I'm considering another 6'er from Rondo. Don't know if it's going to be the SX Ursa or one of the Brices. A bassist really can't lose with Rondo music at all.