TalkBass Forums

TalkBass Forums (http://www.talkbass.com/forum/)
-   Basses [BG] (http://www.talkbass.com/forum/f8/)
-   -   Where to get Jazz Bass body with rear cavity? (http://www.talkbass.com/forum/f8/where-get-jazz-bass-body-rear-cavity-963014/)

Electricblue 03-01-2013 04:38 PM

Where to get Jazz Bass body with rear cavity?
 
So I'm bored with my Affinity Jazz bass and I want to swap the body on it.

I'm looking for a Jazz bass body with the electronics cavity in the back so I can have the knobs and jack in the position that they would be with a standard jazz body, but with a clean look at the front.

I would like the neck cavity, pickup routing and bridge screwholes already done, and I would oil the wood with Linseed Oil. We used the stuff on our new kitchen worktops and it's nice stuff. So I would be looking for a nice wood surface, preferably one-piece but that might get pricey?

Work's slow at the moment and I'm only looking to spend about £100 on the body. It's a long shot, but I'm getting handy with a router now so if worst comes to worst I will have to buy a template and a block of wood :bassist:

I already have the electronics, neck and hardware, which I'm happy with.

If someone could shed any light, that would be rad. Thanks. :D

Clark Dark 03-01-2013 04:41 PM

Warmoth comes to mind but there are other venders, some can be found on ebay.

Snakeman1066 03-01-2013 04:50 PM

http://www.usacustomguitars.com/

seang15 03-01-2013 04:55 PM

Allparts as well

joeyl 03-01-2013 04:55 PM

http://www.warmoth.com/Showcase/Show...ss=1&Path=Body

1bassleft 03-01-2013 04:56 PM

As you're in Blighty I would suggest contacting these people:

http://www.guitarbuild.co.uk/product.php?product=82

but I have been in contact with them three times over a relatively simple number of adjustments to their '54P and their comms are painfully infrequent. Perhaps if you mentioned that nugget in your enquiry they might pull the finger out on both fronts :)

eddododo 03-01-2013 05:08 PM

Go with warmoth or usacg .. Allparts is fine i guess, a litte bottomshelf though

Don't bother with Ebay no-name garbage, youll be in for a world of annoyance at best

klaus486 03-01-2013 05:19 PM

Definitely Warmoth. You can have them make it however you wish.

1bassleft 03-01-2013 05:24 PM

Quote:

Originally Posted by klaus486 (Post 13961855)
Definitely Warmoth. You can have them make it however you wish.

but not, unfortunately, for £100/$150. The shipping and import tax alone will swallow that. I know, because I've long wished it weren't true :bawl:

If the OP settles for 3-piece, at least the UK builder is in that ballpark.

1bassleft 03-01-2013 10:42 PM

Quote:

Originally Posted by 1bassleft (Post 13961746)
As you're in Blighty I would suggest contacting these people:

http://www.guitarbuild.co.uk/product.php?product=82

but I have been in contact with them three times over a relatively simple number of adjustments to their '54P and their comms are painfully infrequent. Perhaps if you mentioned that nugget in your enquiry they might pull the finger out on both fronts :)

Aargh, a different person emailed me on Weds and my reader spammed it off. My apols to them, they aren't ignoring me. They could be the answer you need, OP


All times are GMT -6. The time now is 03:46 AM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.