- how does action effect sound?
- cleaning and polishing
- Gotoh 203 for Rondo Shortscale P?
- Modulus Flea Truss Rod
- hex key size
- Battery Compartment Holders
- Stingray 4string set up to Drop B...?
- Quiet A string - But only downwards with a pick!
- Setting a GraphTech nut into an Essex-esque bass
- Can anyone recommend someone for relicing a neck
- Time for refretting?
- Straplocks don't fit thru strap - where to cut strap?
- How do i fix prett bad chips on my bass?
- Guild B301 bridge adjustment
- Ibby SRX550 action....suggestions?
- cleaning fender 2008 USA J bass neck (maple) with WD40
- Will A Reggie Hamilton Bridge....
- Warmoth Lefty/Righty Reverse Necks
- What year p basses had lollypop shaped tuners?
- opinions on wilkinson brand hardware?
- Replacement tuners
- Intonation screws on Badass II
- Newbie success!
- Setup in the Seattle/Tacoma area?
- Fitting a drop-in replacement bridge
- Fretboard Oil Treament Methods
- Ashtray cover over Badass II ?
- DIY Fretwork?
- Need a luthier in Louisiana
- Amp repair and configuration issues go in Amps, not Setup
- Wenge Fingerboard Crack / Separation
- Two-Piece Bridge: 6-String?
- Anyone have pictures of basses that use TRU-OIL?
- Is this bass worth re-fretting?
- sandpaper on finished neck
- Replacement Nut for Yamaha 765a 5 string
- [Help] Fret Buzz on 1st fret...
- Bridges for 51 p bass
- hardshell case hardware
- Hipshot d tuner for Squire P
- Any suggestions for "reconstructing" a Fender P-bass 74 bass from the body?
- cleaning supplies
- String Retainer for Rondo's Floppy E?
- Strap Button Replacement
- tightening up a B string
- 1986 G&L L2000 neck refret question
- Electronic tuner--Correct use? [BG]
- broken trusrod in a neck thru bass
- Defretted-Negative contour
- [Help] Rickenbacker 4003 Truss rod
- How much lighter are lightweight tuners compared to CIJ Fender tuners?
- Twisted neck help.
- "Vintage" vs. "Standard" Tuning Pegs
- Acoustic Bass
- Thunderbird Bass Bridge & Pickup COVERS (TELE/P-Bass Ashtrays?)
- "armrest" for acoustic bass
- Sighting Down the Neck
- Bridges for a Fender P?
- this is a cool idea (ebay content)
- Gold ano guard fits MIM Standard P?
- (re)Centering pickup in pocket
- Dunlop Straplocks
- Unknown problem! Please help!
- Intonation setup
- STOCK BRIDGE FOR 96 MIA DELUXE P
- Handmade Cocobolo Bridge Redesign
- Has anyone gone from medium/jumbo frets to vintage?
- What is .010" in fractional inches?
- GOTOH vs BADASSII
- Cracks in clear coat...help/advice?
- Found a MIM Squier Series Jazz Bass, Need Help
- 77 P bass problems
- Cleaning off old stickers..
- broken tuning key
- Machine head broken
- Mounting Hipshot Style A bridge
- Fret buzz on a neck through...
- Best Nut for Fretless basses?
- truss rod for 30" scale
- Nitro curing time
- Warwick Just a Nut II or 3 dimensions???
- Bridge Question
- Dobro Bass, Bridge issues.
- epoxy over stain?
- Nitro Lacquer warmer sounding than Poly?
- Was I stupid or unlucky?
- Clicking sound on a Jazz
- $300 bridge? Craigslist find
- Handmade Coca-Bola Bass Bridge
- Setting Action on Bass
- the effects of weather on bass
- Lakland Skyline- do I need to set it up better?
- i heard a snap while adjusting the truss rod
- Need New Tuners For a Fender 50's Reissue Pbass
- Fender Jaguar Tuners
- guild b 50 nut/string alignment
- Hipshot tuner question
- Rrrramps!!!
- Can you polish turd?? Fender Mustang Bass..
- D string has an annoying twang
- basses for newbies (SX batch build thread)
- Doing your own set-up and neck issues
- put an ibanez neck on my jazz?
- what size wrench on a standard jazz?
- Keeping the second bass on stage
- Removing neck is not a bad idea?
- 5 string neck on a 4 string p-bass?
- Finish Fender uses on necks?
- home made fretless Q
- Are there any factory specs for setting up a MM Sub?
- opti-grab... am I the only one...
- Black Nickel hardware
- Epiphone Gibson Bridge Saddles
- Gibson 3-point bride... but for six strings?
- Where can I get a 5-string bass nut?
- Peavey T-20 Truss Rod problem
- GUILD B 50 QUESTIONS/ STRING ISSUES
- Need more relief, truss nut is loose
- Finding the Right Nut
- How to clean SERIOUS gunk
- Neck shim, is this ok?
- Quick question about yunin machine
- P-Bass Help!!
- My lucky day?
- E String intonation cranked ALL THE WAY back!
- Hipshot Bass Xtender: lift instead of drop?
- my finish cracked like a windshield!
- P Bass mods advice
- Where do you buy components?
- nut replacement question
- Double thump set up
- Advise me a Buzz Feiten capable tuner!
- Nut replacement question
- Replacement Pickguard for Sterling SB14
- Unbalanced output across strings - '79 PBass
- Neck bow, how much for an adjustment?
- Bass Bridge Cover Question
- Tuners for...
- Does a Fender Jaguar Bass use the same bridge cover as the Jazz Bass?
- Cleaning corrosion?
- Bass Machine Heads - Help me!
- Jazz Bass pick guard question
- pain in the neck
- GK neck on SX body?
- Gibson G3 Grabber neck replacement
- Is a bridge cover just for looks, or does it actually serve a purpose.
- problem
- filing?
- some gorilla pounded in my frets
- Squier CV Jazz finish matching
- Babicz Bridge
- Excessive Fret Buzzing
- Dual Expanding Truss rods
- Bridge problem?
- Fishing rod epoxy for a fretless ?
- Hipshot A, Fender HMV - To shim or not to shim?
- The size of my nut
- Hipshot A bridge string height
- Weird ratiling noise when i play unpluged
- Will these knobs fit a P bass?
- Bass Guitar Volume Knobs
- Low action for soft bassy tone?
- Checking relief, neck straightness and string arcs
- Will B or C tuning work on Shortscale bass?
- need fretjob in syracuse, ny
- action problem (will not adjust low enough).
- changing string spacing
- New nut on a P, Bone or Tusq?
- upgrades: jazz to soapbar and bridge install questions
- my bass fell on the floor
- Where to find a...
- luthiers?
- Er....help....I think I've truss rod issues.
- Has anyone tried to stain a bass?
- Anyone have a guide on drilling holes in a bass
- Buzz Feiten and tuners
- Carvin LB76 Bridge
- Good fretless set up guy in NYC?
- Truss Rod Replacement Carvin LB75
- Fender Precision Bass HMV with a bridge cover?
- And so it begins (Spare parts pbass construction)
- Hipshot Ultralight VS. Gotoh Res-O-Lite tuners
- fretboard radius
- Filing fret ends on a bound neck
- do Hipshot ultralights really help neckdive?
- Changing Strings - What do you do and why?
- worn out fretless neck?
- Bridge Mounting Screws!
- Badass II or Badass III?
- Lakland pre-cut nut for Skyline DJ4
- Bowed Mustang.
- Loosen strings before saddle adjustments?
- Upper fret buzz
- Cleaning Composite Wood Fretboards
- How do I clean a fretboard?
- interchangeable nut...? Possible?
- Help with bass setup
- Can you put a Jazz neck on a P bass?
- SKB Bass Safe help needed!!!
- Neck is bowing backwards?
- Repairing Teeth Marks?
- Measuring tolerances
- Classic Vibe Jazz Bass Modifications
- Shellac Finish
- Cha, cha, changes, my intonation changes
- fret lift problem
- Truss rod completely stripped...help!!
- Can't keep my necks from bowing
- Kluson MF4LN
- Dual Truss Rod
- Modifying a P-Bass
- Best way to get rust off of pickups on Stingray?
- wood bridge
- Chris Squire RIC pickguard paint is flaking
- D/G string volume
- Badass Bass II Ashtray Cover
- inotation on a Fender V
- Explorer bass bag
- Where to get parts for 90's Ibanez SR1300PM
- Rosewood Oil removal for Epoxy
- setups and repairs are very therapeutic
- Bass Making!!
- Black Pbass pickup cover
- Part Time Builders that will mod another bass?
- schaller 3d bridge spacer
- Minor setup questions
- best way to clean a gloss finish after a gig?
- New E string is dull and full of overtones
- Funky Looking Bridge - What The Heck Is It?
- Advice on customizing my bass.
- 15mm hole machine heads
- natselection has a new bass! 1975 Fender P oh snap!!
- Mounting bridge on SX - screw holes aren't lining up
- Extra work needed to make warmoth playable?
- Advise on Sleek bridge
- Not a direct drop in!
- Body Thru Bridges??
- Stripped screws in jazz jack plate
- Anyone know the radius of .......
- Broken Strap Button screw!
- Hipshot Bass Xtender for Skyline Bob Glaub ?
- Intonation- Saddle goes no further
- Action sucks after reassembling Ibanez
- Setup in Northern Virginia
- Painting a Pickguard
- Nut replacement. Need help.
- splitting frets!
- Adjusting Action On This Bridge?
- fender tuning peg question.
- Maxed out truss rod. What size\type washers?