- Lowering the nut on a Squier VM Fretless
- dent in neck
- SX SPJ62
- Questions about brass bridges and othe Ibanez goodness
- should tunning really be a bitch?
- Fretless Bass Buzzes on One Spot
- 78 Gibson Ripper - Replacing tuners????
- Grovers
- Spare Geddy Lee Pickguards?
- Replacing frets with jumbos
- I HATE INTONATION!!! please help
- Vintage Refret Dilemma
- set up for epiphone viola
- SX SJB-62 4+1 5 String Bass?
- Hennessey Straplocks
- P-Bass setup (pup screws)
- Sperzel? No thanks
- Where can I get a neck for this?
- Godin SD - truss rod nut chewed and frozen
- Should I be worried?
- Ebony fretless fingerboard maintenance
- One piece bridge saddle intonation?
- Set up for tapping
- Neck replacement for Fender P Bass
- is this electric bass worth salvaging?
- Starting my first defret... Have some questions.
- fretless nut height question
- Will this cause any damage to my bass?
- bad idea? (de-fretting related)
- clacking string noise
- SX (Essex) Body With Warmoth Neck?
- Installing new neck
- Neck Plate ?
- Bridge Shim? How to Lower a Bridge?
- 1965 Mosrite Celebrity
- Jazz neck on a p body
- 1st fret buzz on A string only
- action changing later after truss adjustment?
- HWY 1 Jazz Neck
- What's the cause of this?
- Bridge saddle height screw stuck
- Rebuilding a p-bass
- Questions about pro set ups and fret-leveling.
- Bridge pins on an acoustic bass.
- weak d string
- HELP! My D string won't intonate correctly...
- Truss rod bolt? stripped rod?
- Fret buzz between 2nd -4th frets
- String action on Brice 8-string
- Setup Help - Fender Jazz 60s Re-Issue
- Badass bridges on Precision basses?
- Looking for Hipshot Ultralites (licensed)
- I fixed the Low B on my 2008 Fender P5!!!
- Slight problem with bass
- MIM Fender Jazz Nut
- easy question for 62 ri owners...
- Replacing a bridge (Rockbass Corvette)
- Drilling neck pocket
- open G string buzz
- Upping the String Gauge?
- Fret wire / dressing preference?
- Please help specify HS Ultralight tuners for Fender Aerodyne Jazz Bass (CIJ)
- new bridge?
- thank you TalkBass!
- Bad Ass bridge low action?
- Help!! neck slipping on a Stingray 4!!
- warmoth vs. mighty mite
- Gotoh Fender replacement bridge
- I think I have a broken truss rod ...
- READ ME: Pickup, preamp and bass wiring questions go in the Pickups forum!
- Help! Cracked body on Musicman S.U.B.
- Advice on respraying a EDB600 Ergodyne
- neck wear problem
- Truss rod loose whenever strings are off?
- Bad Ass III Bridge...Doesn't fit my MIA Jazz?
- Squier VM Fretless Buzz after 10th fret
- String buzzing.
- lots(really) of fret buzz
- Tuning and intonation with Dtuner
- FretFX LED's..good or bad?
- Intonation question
- Will this hurt the finish?
- BEAD instead of EADG?
- Hipshot Supertone Question
- Thunderbird Bass Help!!!
- How hot is too hot?
- Cleaning Polish Cloth
- Can Someone Reccomend a Bass Tech in NYC
- Strange Buzz!
- drilling clean preamp switch holes through a poly finish - suggestions?
- Tuner for doing intonation
- Playing bass in a humid atmosphere
- Removing paint
- Hofner-Type Tuners
- What size truss rod for mexi fender squier jazz bass?
- Cleaning Products
- parts for bridges
- Leo Quan Bad Ass Bridge Not Being Made Anymore?
- scratches on fender sunburst
- Attaching pickgaurd w/out screws?
- D-tuner question?
- Heat is very not good for basses
- Epi Thunderbird to a Fenderbird
- Badass bridge hex key
- Dumb intonation question
- sqiere vintage modified 70's jazz bass problem
- How to Fix Rough Spot on Back of Satin Neck
- Open A/Open D tuning (alternate tuning content)
- Is this Gap anything to worry about?
- Lower frets on the b and e string?
- have you ever heard of this
- Fret Buzz only on frets 6-10
- SF repair shops
- recessed straplock fell out
- Tung Oil = Heaven
- Badass II Bridge on a Stingray
- SX fretless neck
- Strange buzz on Fender Jazz Fretboard
- fretboard cleaner
- Weird problem, notes choking above 17th fret.
- Truss rod wrench
- Putting BEAD on my Geddy sig
- Help, My Neck Moves From Side to Side!
- Pickups fell in
- bent fret??
- replacing nut
- A really dumb bridge question
- Problems intonating my bass
- rargh straplocks
- Vintage TEISCO/Univox/Silvertone etc. Machines..
- Double "Harmonics" or something...
- Roscoe Beck V bridge replacement options?
- Hofner Contemporary- Cracked Pearloid Tuner
- Help needed: Intonality
- Defreting Ibanez AGB140 ?
- truss rod nut
- Neck Sanding?
- buzzing sound
- defret finishing - slot filling?
- First time Bass Neck Defret
- Open Pore Natural (OPN) care
- Boring Dull Sound
- High Action?
- Wide P bass replacement necks.
- Nut slots distances?
- What Hz should I tune my bass to?
- C string problem!
- 35" graphite repl neck ? NO moses
- Question on cutting pickguard material.
- Jazz Bass Volume knobs question..
- Fret work?
- Visible fret markers
- MR-IV Bridge Nightmare
- SD Pickups and Badass Bridge
- Can't Get Slap&Pop
- Looking at building a Bass, a few questions.
- Truss Rod extension
- Machine heads and bridge for musicman
- 74 Jazz help!
- Setting up a slide bass.
- MIM pickguard question
- Ferrules for Precision
- P-Lyte knobs stripped
- Best way to heat a neck without fancy tools
- MIM mod questions.
- allparts neck difference between pmo - pmov
- Melbourne Bassists...
- looking for a cheap tuner to set my innotation
- Bass Techs in the Philly Area
- Mex. Fender Jazz to Jazz/Precision Combo Bass
- Vintage modified upgrades?
- Fret buzz
- Adapting an acoustic bass
- C-G-C-F Tuning Setup
- Looking for advice on my mexican p-bass
- Nut Cleaning
- Strap Lock - Compatibility
- Strange goings on with my A and E strings
- Going to Italy-What to bring?
- squier with a curved neck
- Filling tuner screw holes, dowel size?
- Optimum PUP height on '54 P?
- 5 string string retainer mod.
- Kahler 7410 Hybrid series
- Cleaning Necks
- thumb bass not making sound
- neck or bass problem?
- New neck too small for pocket
- Replacement of tuner knobs?
- skinny bridge?
- My Bass has been dented
- Larger gauge A string buzzing in nut slot vs. lighter gauge not?
- Reverse Fret Buzz?
- who here sets up there own basses?
- After buying a bass
- Badass II on a Squier VM Fretless
- Hanging a bass on the wall
- Cheapo tuner good enough for intonation work?
- Fretless conversion - Warmoth neck
- Replacement Saddle(s) for a Badass II Bridge???
- Need Help Stopping chip/crack In New Paint From Getting Worse
- Adjustment question
- 4001 setup...... myths?
- Shaking bridge, shaking truss rod
- 6 string bass truss rod expectations
- Thumb anchor/rest for new Geddy Lee Jazz
- G&L Tribute truss rod at max
- Technique or action problem?
- crack in fretboard
- Bass necks?
- d string sounds a bit 'girly'..
- Tuss rod question for Mike Dirnt P Bass
- stripping paint
- hipshot issues
- action issues and Bass setup in Toronto
- Hamer 12 String Dropped D Intonation
- Pickguard for a Precision Bass - Left Hand!
- Defretted Action
- Problems with my P
- Bridge options for Sting Bass
- PLEASE HELLPP!! I'm doing a geometry project!!
- Best Bang For The Buck Tuners
- replacement P-neck
- B-String Intonation Off (E,A,D,G all good)
- Ebonol Fingerboard Refinishing
- Stripping a MIM Jazz's finish
- is it worth it?
- Paint stripping p-bass
- Thanks TB!
- Stingray 5 B String Issue Please Help
- Epoxy type for fretless?
- Finally got truss nut removed!
- Cleaning my wenge fingerboard.
- bad string rattle
- bridge nuts loosening
- Allparts Bass Neck
- deadened G on P bass
- Need setup advice for new Squier VM Fretless
- p bass string help?
- Fingerboard Revival
- Gotoh 203 fits under bridge cover (ashtray)?
- Overhaul!
- 5-string bass: low-B or high-C
- open string buzz
- E-string overtones
- 5 string to four
- Removing pickguard on Urge MX Bass
- few questions concerning truss rod and fret buzz
- Where to buy an inexpensive fret rocker?
- Crooked Bridge on Squire VM Fretless