- Neck Flex?
- Fender Tross Rod Tool Slips in Nut?
- Saddles up all the way
- Intonation Question
- E string buzzing up to 8th/9th fret
- Gibson vs Epiphone 3 point bridge
- fender pre cbs tortoise pickguards question
- Best fretboard wood for fretless w/ roundwounds?
- Raised tuners
- Highway one jazz bass pickup cover
- Jin Ho Machines?
- Input jack fell into bass
- nut measurements for Yamaha TRB6ii and SBMM ray35
- Handguard or no Handguard???
- Help With Shielding A Jazz Bass!
- Fender American Deluxe Precision with BEAD tuning
- Fender Vintage bass saddles width?
- clicking noise?
- truss rod
- ibanez SDGR 51611 bridge part # req
- maintain brazilian rosewood fingerboard ?
- DIY TOM Bridge - How much intonation adjustment room?
- Replacing Rickenbacker bridge
- Bridge saddle screws
- Numbered (Strat-style) 1/4" knobs for Precision bass
- Neck Finish
- Refret
- Wrong strings for my bass? Please help!
- Repairing/ Restoring Peavey Finish?
- Thoughts on cheating intonation on a lined fretless.
- douglas web na.
- Afraid to set my neck xS
- Polishing & Buffing Out Gibson Nitro Finish
- Rickenbacker 4001: A Bass Odyssey
- front j-bass pickup cover
- Fret Buzz
- 2008 American Standard Jazz bass fretboard issue.
- Cutting/slotting Nuts?
- Black Body Pickguard question
- Total noob question - I want to replace these tuners...
- Luthiers in Miami
- Scratch prevention
- Tuning pegs, machine heads or tuning machines
- Paint?
- Yikes, nothing holding on the neck?
- something a little different.....
- Neck Dive on Squier VM Jaguar
- Lakland 44-02 Saddles
- Loose bridge pins on Dean ABG
- Only seasoned slap bassers reply please
- Fender Road Worn '50s P nut
- Does reverse headstock improve low B - any experience?
- Need to fix a loose neck on an acoustic
- Neckplate or ferrules?
- Hipshot Bass Tremolo Questions
- PU cover on Fender Jazz V
- Drop A# on a 5 string bass?
- Rickenbacker 4003 Treble Pickup problem - SOLVED!
- Is this normal?
- warwick thumb set up?
- Installing a Rickenbacker bridge..
- Best way to drill for ashtray/bridge cover
- Goofy question re raising Fender Original p bass pickup height?
- Volume control knob?!?!
- Help with Neck Shimming
- Wood filler
- Ibanez GSR205: New Tuning Key
- Lakland 55-01 strap locks that fit stock hardware
- If I switch to lighter strings?
- Possible nut height issue?
- Best hardshell case for Fender Precision 1973
- spares for Yamaha Pulser 450
- Epiphone Gibson 3 Point Bridge Modification Through Body
- My first set-up that I have done on someone else's bass
- ESSEX USERS TAKE A LOOK!
- Squier Precision BEAD tuning help.
- Cable plug loose inside input jack
- Not another bridge swap (Squier content)
- Where to find machine heads
- Unwanted string resonance-What can do about this?
- Setup? Low E is louder than all else!
- Correct hex wrench sizes for this Schaller bridge?
- D-tuner and neck dive
- Custom saddles?
- Why are my springs not doing a job, and is it bad for the bass?
- sure this has been asked before..
- Logo removal/customization
- adjusting a j-bass neck (noob)
- A few "how do I _?" questions
- Need help: looking for Wal string tree
- Fender V-er question
- Xavier Blackout Mod
- Wilkinson Bridge and Tuners?
- Hipshot D-Tuner.
- Damn I'm dumb.
- Anyone have info or a link where I can find a tort pickguard for a short scale SX?
- Precision Bass Bridge Cover
- No end of tuning problems with an Ibanez Soundgear
- best or proper three bolt neck shim
- setup the pups....
- The Guitar Guy in Toms River, NJ
- Help installing new single Bridges
- badass II fret buzz
- What is the use for Just-A-Nut?
- Help! D:
- Broke tuning screws off in headstock
- Candy Cola
- Quick help?
- Soaking up the lemon oil like a sponge...
- neck too straight
- How best to repair and/or reglue strip
- Need a new Nut (Stingray 4)
- Neck Dive - Fixed but not.
- Knob not centered correctly.....
- Buzz on open low E and first fret on E on Dano Rumor
- Fender Jazz V pickup cover replacement
- a simple set up question
- Muddy E String-is there a fix-I don't think so.
- OLP Musicman neck heel dimensions?
- Bridge woes (Wilkinson). Where can I find Schaller bridge shims?
- A good setup?
- Bass Mutes?
- Bass adjustment help.
- Cannot set intonation on one string
- Help with Set-up
- Ken Smith Bridge
- Are the Gotoh Resolite Bushings Also Lighter?
- 'Fret Mass' & Sustain?
- Cracked Inlay on Ric 4003
- MIM Jazz: Rough fret edges on neck
- modifying my 71 fender jazz
- Nut Height & String Clearance - same on all strings or more on heavier strings ?
- $9 Rogue Bass Upgrade
- Short Scale - More or Less Relief ? Nut Height ?
- E string buzz when tuned to D
- Fender AmStd Bass Tuners vs. Schaller BML...
- Thumb Rest
- "Crescent" ebay p bass de-fretting
- Warwick setup
- Tuners that don't use screws to mount
- Open A string buzzes at the nut.
- Best short scale strings
- In need of a good set up guy in South Jersey
- Dead Spots
- String Guide Bar Height
- Replacement nylon collars for Gotoh tuners?
- BOUGHT A USED BASS--DO I NEED SETUP?
- Wolf Notes
- Knobs for Fender Jazz Bass Plus
- Fretless Maintenance Question
- Vintage Case Restoration
- peavey foundation tuners
- Fretwire replacement and low action
- THG Knobs
- Best way to enlarge pot holes?
- warwick "Just a Nut"
- Getting a new MIM Jazz bass, want to upgrade
- glow in the dark pickguard?
- Fender MIM Jazz Bass bridge buzz
- help with cause of dead "frets"
- Hofner Truss Rod Issue
- How do I set a proper neck angle?
- Fingernail Scratches on Chrome?
- Finally want to mod my MIM jazz.
- Re-Fretting
- 70's mod jazz Squire
- can anyone identify this weird bridge?
- My squier project
- Plastic Nut vs. Bone Nut
- Hipshot d-tuner
- $80 for fret leveling and recrown?
- Neck resonance/rattle
- Pick-up Adjustment
- Can I re-level, dress and crown frets without replacng them?
- ? nut trouble ?
- question about make a fretted bass fretless
- Broken Nut?
- Custom Pickguard Image?
- Mike mushok baritone to bass vi tuning?
- Squier vintage modified jazz bass fret buzz
- Sanding Your Neck
- Dimensions for vintage tuner screw-holes
- Bad Sustain
- Dropped tuning
- Can anybody help ID this body?
- Stripping bass body with a heat gun
- Los Angeles bass techs
- Making the neck of your bass faster
- Gibson 3pt replacement bridge..
- Roscoe Beck IV Bass Bridge ????
- Radius on a '93 MIJ fretless jazz bass neck?
- P/J bridge/pickup cover combinations
- Hofner Icon bass setup / strings
- Pickup Covers?
- Gotoh. Make a string-thru bridge?
- Ashtray on an '08 American Standard P?
- special tool for removing knobs?
- Anyone have a Tobacco Sun Burst bass without a Tort/Black/White pickguard?
- Bump at the high end of the neck - Fender Jazz Bass Plus V
- Strings hitting pickups in upper frets
- Action problems.
- 51P bass replacement bridge: string thru body and bridge
- Weird open E sound
- "My neck is nice and straight"
- Glazed the fretboard of my fretless with epoxide resin (video)
- Frets loose?
- Chrome Bridge w/ nickel screws
- Peavey Foundation fretless neck
- Fender Modern Player question...
- Hipshot Ultralite D-Tuner - remove lever?
- NEED A FENDER AMERICAN JAZZ BASS HEADSTOCK
- Nut Replacement?
- Tuning Key is To Tight...need help
- A twist in the neck? (Hwy One)
- black/rosewood pbass pickguard pics
- black/rosewood pbass pickguard pics
- yamaha trb jp problem
- Saddle Help!!
- Hwy 1 and Badass bridge...?
- Any BADASS experts around ?
- HELP! need help ordering the right size tuning keys
- Who's the best 3rd party parts manufacturer?
- router bits?
- Raising the height at saddle for one string?
- Bridge suggestions for 2-5/16" spacing
- TOO MUCH BASS!!!??
- ThunderBird Saddle Help!
- Fender 51 P bass Reissue: loose cup jack
- Exact fit tuning machines- squier
- Help identify this pick!
- Intonation question.
- Peavey Foundation bridge questions
- My Truss Rod Repair
- AFTERMARKET ADJUSTABLE NUT: Anyone Have Any Experience With This?
- Nut slot too wide
- Buzzing Rick
- Should i sand the frets?
- P-bass help?
- Schaller 3D-4 and 3D-8 saddles: Interchangeable?
- can someone give me a good guide for action adjustment?
- NEED SERIOUS HELP WITH MY DEAN!
- Repairing/re-binding a semi-hollow bass
- Badass + Peavey?
- where can i find this pickguard for a g&l l-2000 ?
- Yamaha truss rod tool?
- bridge tonal characteristic
- fretboard rise at the neck joint
- Fitting 2-piece Thunderbird bridge
- Bent neck on fretless?
- Shim My '78 Jazz Bass