|
|
|
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$500.00
|
10.0
|
|
|
|
|
|
Description:
|
SPECIFICATIONS PLX1202 PLX1602 PLX2402 PLX3002 PLX3402
STEREO MODE, Both Channels Driven
8 ohms (20 Hz-20 kHz 0.03% THD) 200 W 300 W 425 W 550 W 700 W
4 ohms (20 Hz-20 kHz 0.05% THD) 325 W 500 W 700 W 900 W 1100 W
2 ohms (1 kHz 1% THD) 600 W 800 W 1200 W 1500 W 1700 W
BRIDGE MONO MODE
16 ohms (20 Hz-20 kHz 0.1% THD) 400 W 600 W 850 W 1100 W 1400 W
8 ohms (20 Hz-20 kHz 0.1% THD) 700 W 1100 W 1500 W 2000 W 2200 W
4 ohms (1 kHz 1% THD) 1200 W 1600 W 2400 W 3000 W 3400 W
Signal to Noise (20 Hz-20 kHz) < -106 dB < -107 dB < -108 dB < -107 dB < -107 dB
Input Sensitivity @ 8 ohms 1.0 Vrms 1.2 Vrms 1.5 Vrms 1.7 Vrms 1.9 Vrms
Input Sensitivity @ 4 ohms 0.9 Vrms 1.1 Vrms 1.3 Vrms 1.5 Vrms 1.7 Vrms
Voltage Gain 40x (32 dB) 40x (32 dB) 40x (32 dB) 40x (32 dB) 40x (32 dB)
Output Circuitry AB AB 2-Step Class H 2-Step Class H 2-Step Class H
Power Requirements
(1/8 Power Pink Noise @ 4 Ohm) 6A 10A 8A 10A 12A
ALL MODELS
Distortion (SMPTE-IM)
Less than 0.01%
Distortion (Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power
Less than 0.01% THD
Less than 0.01% THD
Frequency Response
20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB
Damping Factor
Greater than 500
Input Impedance
6k ohms unbalanced, 12 k ohms balanced
Input Clipping
10 Vrms (+22 dB)
Cooling
Variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: 3-pin XLR & 1/4" TRS balanced
Output: Neutrik® Speakon® and touch-proof binding posts
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection
On/off muting, DC-fault power supply shutdown
Dimensions
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails)
Gain
40x (32 dB)
Weight
21 lbs (9.5 kg) net, 27 lbs (12.3 kg) shipping
|
|
|
|
Author
|
|
JonathanD
Registered User
Registered: December 2006
Location: Atlanta, GA
Posts: 3047
|
|
Review Date: Tue August 14, 2007
|
Would you recommend the product? Yes |
Price you paid?: $500.00
| Rating: 10
|
|
Pros:
|
Light wieght, loads of power, LowFreq filter, 2RU, Options+
|
|
Cons:
|
I don't have 3 of them.
|
|
As you can read above, this amp has options galore, low weight, and plenty of power.
I play an EBMM and a G&L Trib L2500 and I uses either acme 210 cabs or an ampeg 610HLF. I have owned many pre amps and power amps.
I use a Line6 POD XT LIVE or a Tech 21 PDDI into the QSC 2402 PLX. I love this amp because I can run PA off of one side and get 1200watts for vocals and run my rig on the other side and get 1200 watts. Or I can run a mic into my preamp and run it out and use my 3 210 acme cabs and my 610 ampeg. I actually like to use the 50 Hz filter every once in a while if I need to get more out of the acmes which are not efficient.
When I got this amp used it rattled badly. I got help Through the forum and was treated me like a king. They shipped a box and a call tag to me so I could send it back. The turn around was lightning fast and they even fixed things I admitted I screwed up by messing around on the inside.
Great product is what gets me to try something, amazing customer service is what gets me to stay.
------------------------------
Band = johnwaynehasrisen.com
|
|
|
|
Powered by: Reviewpost vB3 Enhanced
Copyright 2010 All Enthusiast, Inc.
|
TalkBass Forums
