Ok I have an OLD set of EMG PJ active pickups, hardwired solder type for cheap. Both were replaced by newer solderless ones a while ago...They have seen better days, the J pickup is functional no problems, just some splice work because leads were short. P pickup however is probably not functional anymore. It was when it was installed, but since removal its just been in the drawer. The insulation and the bare shield conductor somehow became frayed coming out of the epoxy, I checked it out a bit, but then decided I didnt care enough to attempt repair Maybe these can be good if someone wanted to gut them open and check out the insides...anyways if you want them they are yours. Pics when I can. Thanks.