1. A Supporting membership is required to post items for sale in the classifieds

  2. Welcome to TalkBass, the Premier Bass Player Community and Information Source. Register a FREE Account to post and unlock tons of features!
  3. Please Read:Classifieds Rules, Usage Agreement, and FAQ for info on bumping, marking SOLD, and more.

  4. In addition to the drop-down search menu at the top-right of this page, you may also do an advanced search for even more accurate results. See this thread for more info

2 pre-wired P bass harnesses (CTS/Switccraft/OrangeDrop/PIO)

Discussion in 'For Sale: Accessories' started by petrus61, Dec 16, 2013.

Thread Status:
Not open for further replies.
  1. petrus61

    petrus61 Supporting Member

    First harness consists of two CTS EP885 250k Audio pots, One Switchcraft jack and one Srague 225P .047 "orange drop" capacitor with vintage style pushback 22awg hookup wire. All new components.


    $26 shipped in the CONUS via Paypal

  2. petrus61

    petrus61 Supporting Member

    Second harness consists of two CTS EP885 250k audio taper pots, Switchcraft jack and NOS vintage Sprague Vitamin Q .1uf paper in oil military spec capacitor. The .1uf cap value was stock on Precision basses from 1951 up until the mid 60's. Wired with 22ga nylon coated hookup wire. All new components.

    $27 shipped in conus via Paypal.
  3. TalkBass Friendly Advertisement

  4. petrus61

    petrus61 Supporting Member

    Both can be had (one for each P bass!) for $50 shipped. These are ready to go. Simply wire bridge ground and pickup leads. Locking nut, washer and dress included for each component.
  5. petrus61

    petrus61 Supporting Member

    Give your P bass the guts it deserves!
  6. petrus61

    petrus61 Supporting Member

    Holiday price drop: $25 each!
  7. petrus61

    petrus61 Supporting Member

    Deal pending on first harness
  8. petrus61

    petrus61 Supporting Member

    First harness sold!
  9. uptowndirt

    uptowndirt Supporting Member

    Feb 16, 2008
    very good idea for mim and mik basses
  10. RS


    Aug 27, 2000
    Cleveland, OH
    Can you describe the tonal difference between the two?
  11. petrus61

    petrus61 Supporting Member

    A .1uf cap is going to shunt more highs to ground, resulting in a darker overall tone when the tone pot is rolled off compared to a .047/.05 which is the most common P Bass cap value since the early to mid 60's. If you have ever played a stock 57 or 62RI, .1uf is the capacitor they come with.
    A .047 is going to shunt less highs to ground, meaning a slightly brighter overall tone when rolled off. This is the most common Precision cap value and can be found stock from the 60's until today. This is the value US and MIM standards are currently equipped with.

Thread Status:
Not open for further replies.

Share This Page

Can't find it on TalkBass?