3Leaf Audio Club - Episode 2

Discussion in 'Effects [BG]' started by fivestringgecko, Feb 12, 2013.


  1. fivestringgecko

    fivestringgecko Supporting Member

    Joined:
    Mar 28, 2007
    Location:
    Denver, CO
    Continued from this thread:
    http://www.talkbass.com/forum/f36/3leaf-audio-club-699307/

    5sg.

    1. fivestringgecko (GR1 #338, GR2 #44, Proton V2 #587, PWNZOR #4)
    2. ccbass71
    3. sillyfabe (GR #445)
    4. One Bad Monkey (Protron Prototype #4)
    5. Mozilla (GR #439)
    6. probasser
    7. BassInUrFace (GR #219)
    8. Robertron (GR #330)
    9. Lecomber
    10. Ba55Man1ac (GR #378)
    11. MikeXbass
    12. The EH Man (GR #67)
    13. paulshearer77 (GR2 #2)
    14. Bassblisters (modded GR1)
    15. Crabby (GR #79)
    16. smallbutmighty (GR #296)
    17. fatherjohncough (GR #387)
    18. Jman2089 (GR2, PWNZOR)
    19. kettch (Fromel Proton #23)
    20. kesslari (Proton prototype)
    21. NortyFiner (GR #261)
    22. HiFi (GR1 #271, PWNZOR #3)
    23. spufman (GR #173)
    24. SG-Jazz
    25. bikeplate
    26. Nv_D_SlapnPop (Proton #60)
    27. ninepoundjammer (Proton #6, GR #358)
    28. basehead (Proton V2)
    29. phatbass30 (Proton)
    30. echoSE7EN (GR2 #93)
    31. G.Bisson (GR #324, Proton #072, PWNZOR #22)
    32. rhino333 (GR #248)
    33. Bassman71 (Proton #76, PWNZOR #17)
    34. f64 (GR)
    35. willsellout (GR2)
    36. 7T9 (Proton #91)
    37. cybersnyder (Proton)
    38. bassplayer7770 (Proton #24)
    39. KevinC (GR #418)
    40. CLJMB (GR2 #182)
    41. Mesa (GR2 #85)
    42. tommyr01 (Fromel Proton #14)
    43. hieronymous (GR2 #28)
    44. AlvarHanso (GR2)
    45. Luckie (GR2 #269)
    46. TFish (GR2 #039)
    47. insain (Proton #046)
    46. Doc Arcade (PWNZOR #12)
    47. AmpedSilence (PWNZOR #65)
    48. Oxothuk (PWNZOR #6, Proton #84)
    49. Dazonbass (Proton)
    50. Alainkills (PWNZOR, Enabler)
    51. Stretchhh (Proton, PWNZOR)
    52. dharmashawn (Enabler #5)
    53. nerojazz (Enabler)
    54. domestique (Enabler, Wonderlove)
    55. CTC564 (GR2, Enabler #7, Wonderlove)
    56. jneil (Wonderlove #2)
    57. meursault42 (Wonderlove #44)
    58. chicomalo (Wonderlove #3)
    59. yukon1736 (Wonderlove)
    60. j0616bass (Wonderlove)
    61. Ur2funky (Wonderlove)
    62. chaosmic (Wonderlove)
    63. Down_Low (Proton V2)
    64. Chris J (Enabler, PWNZOR, Wonderlove)
    65. 999Brent (GR1, Proton, PWNZOR)
    66. HolmeBass (GR1, Proton, PWNZOR)
    67. mjac28 (Enabler #5)
    68. VikingJedi (PWNZOR, Enabler, Proton)
    69. Double E (Fromel Proton #3)
    70. Lonnybass (Enabler)
    71. JohnDeereJack (GR2 #66, Wonderlove #89)
    72. Anarchyok (Enabler, Wonderlove)
    73. Matt Dean (Proton prototype, Wonderlove)
    74. bigdbass (Proton V1)
    75. BassManPatsFan (Enabler)
  2. fivestringgecko

    fivestringgecko Supporting Member

    Joined:
    Mar 28, 2007
    Location:
    Denver, CO
    I've still got my GR1 around, just looking for an application for it. ;)

    5sg.

    [​IMG]
    ashterdam likes this.
  3. BigDBass

    BigDBass PWIYB! Supporting Member

    Joined:
    Mar 22, 2000
    Media:
    16
    Location:
    Chicago south 'burbs, IL
    Guess I could use a number just in case it comes in handy one day....
    [​IMG]
  4. cybersnyder

    cybersnyder Always groove.... Gold Supporting Member

    Joined:
    Jun 19, 2003
    Location:
    Columbia, Md
    Disclosures:
    Endorsing artist: Xsonics cabinets
    That's a fully populated Nano!
  5. Register to disable this ad
  6. fivestringgecko

    fivestringgecko Supporting Member

    Joined:
    Mar 28, 2007
    Location:
    Denver, CO
    +1! Bigd, got you in at #74.

    74. bigdbass (Proton V1)

    5sg.
  7. Basehead

    Basehead Now with even more synthy goodness... Supporting Member

    Joined:
    Jan 3, 2008
    Location:
    New York NY
    5string, if you could update #28 to Proton V2, it would be much appreciated.

    3 leaf 4 life!
  8. Spencer!

    Spencer! Supporting Member

    Joined:
    Jun 25, 2006
    Location:
    Seattle
    Disclosures:
    Stompbox designer/builder for 3Leaf Audio & Darkglass Electronics
    In response to Lonnybass at the end of the last thread - the conventional way to do the gain staging on the Enabler would be to turn the gain knob up as much as you can without the signal clipping, and then set the master volume knob to the volume you need. In practice, since the Enabler has such a scary amount of gain, I usually set the gain a bit lower and the master a bit higher. This gives me a bit more headroom for when I really dig in or when I'm using effects. With my basses I've never taken the gain past 12 o'clock.
  9. BassManPatsFan

    BassManPatsFan Supporting Member

    Joined:
    Feb 20, 2004
    Location:
    S.F. now, Boston originally
    Now that the list had been re-posted, I realize I'm not on it. I have an Enabler and love it.

    Spencer, if you make an Octaver sometime, I would be all over that.
  10. 999Brent

    999Brent

    Joined:
    Jan 1, 2011
    Location:
    Auckland, New Zealand
    ImageUploadedByTalkBass1360694489.254576.jpg
    3 3Leafs....
    Can I get a number?
  11. 999Brent

    999Brent

    Joined:
    Jan 1, 2011
    Location:
    Auckland, New Zealand
    Sorry, Just realised I already have a number, sleepy this morning........ still enjoy the pic
  12. fivestringgecko

    fivestringgecko Supporting Member

    Joined:
    Mar 28, 2007
    Location:
    Denver, CO
    Edited!

    BassManPatsFan, I searched back through the first thread and didn't see a pic. Post one up and I'll get you on the list! I'll hold #75 for you. :bassist:

    No worries Brent. :)

    5sg.
  13. HolmeBass

    HolmeBass

    Joined:
    Jan 18, 2007
    Location:
    Charlottesville, VA
    The list is cool but I am getting more credit than I deserve, I only own a Proton, one of the new ones. Still loving it!
  14. Lonnybass

    Lonnybass

    Joined:
    Jul 19, 2000
    Location:
    Minneapolis by way of Chicago
    Disclosures:
    Endorsing Artist: Pedulla Basses
    This is super helpful Spencer. In order to drive my power amp, my old Eden WTDI required the master to be set at max because I could only get the gain up to about 9'oclock without clipping. So I had to add a booster pedal after it to get more signal out of it. But it seems like the Enabler's gain is so much more powerful, so it can be set differently. Your point about deriving your volume from a high master setting in order to provide for reserve headroom is an especially good one.

    Lonnybass
  15. BassManKev

    BassManKev

    Joined:
    Jun 14, 2007
    Location:
    Leamington Spa, UK
    I'll join with a Wonderlove #132 here :)
  16. -Timothy-

    -Timothy- Supporting Member

    Joined:
    Aug 3, 2000
    Location:
    Hong Kong
    Disclosures:
    Owner: Uni•Sound
    In with my Proton & Enabler
  17. BassManPatsFan

    BassManPatsFan Supporting Member

    Joined:
    Feb 20, 2004
    Location:
    S.F. now, Boston originally
    Ask and you shall receive. Behold a blurry iPhone photo of my board in its current state:

    [​IMG]

    I have an Analogman Mini Chorus coming on Thursday. Once I'll get that, I'll take better pics of the whole board.
  18. JohnDeereJack

    JohnDeereJack

    Joined:
    May 26, 2010
    Location:
    Edinburgh, Scotland
    I initially had similar thoughts about my Wonderlove when I compared it to my GR2. I tried to use the same settings from the GR2 on the WL stupidly expecting it to sound exactly the same but found it didn't respond the same at all! It's quite different from the GR2 and needs a bit more attention but they're both fantastic filters and there are a wealth of usable sounds hidden in there.
    Stick with it and experiment with the settings. You wont regret it. :)
  19. fivestringgecko

    fivestringgecko Supporting Member

    Joined:
    Mar 28, 2007
    Location:
    Denver, CO
  20. j0616bass

    j0616bass

    Joined:
    Jan 2, 2009
    Location:
    Indianapolis, IN
    Is "PatsFan" in reference to the football team? Man, I thought bass players had better sense than that. ;)

    -Colts fan
  21. j0616bass

    j0616bass

    Joined:
    Jan 2, 2009
    Location:
    Indianapolis, IN
    My phone doesn't like the quote function very well, it seems.

Share This Page