1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Ampeg B2 problem

Discussion in 'Amps [BG]' started by GroovyQ, Dec 30, 2013.

  1. GroovyQ


    Dec 24, 2011
    Likes Received:
    Last week end my amp (B2 combo with 15") start to act weird. The signal pop & crack with a sound drop. I'd checked the speaker and no problem. So After some research I was surprise about 2 things:
    1st it seam to be a Crate/Ampeg stuff??
    2nd that issue is recurent with the B2 & B2R...

    Today I opened the head and noticed that it's very sensitive. With only a little touch (chopstick) or movement of the frame it react. Also the limiter light is flashing with the pop/cracking.

    Can't figure out were the soldier or component is causing this.
    Before I bringing to the tech, I would like to have your opinion.

Share This Page