1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TB Android app is working, you may need to uninstall/reinstall. The iPhone app is now updated and should work after you upgrade. TalkBass is responsive to any screen size, so we recommend using your mobile browser for full functionality.

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Ampeg svt 410hlf

Discussion in 'Amps [BG]' started by funkybass, Nov 27, 2012.

  1. funkybass


    Oct 19, 2006
    Likes Received:
    I'm thinking of buying this cab to go along with my 7pro. According to musicians friend, the cab is rated at 500 watts rms with a peak of 1000 watts. Would this be a mismatch for the head?
  2. Hactar


    Sep 25, 2011
    Likes Received:
    Well, your head is
    1000W @ 4 ohms
    600W @ 8 ohms

    And that cab is rated
    500W RMS, 4 ohms

    You can't really "mismatch" a cab to a head, per se...
    However, you can smoke your cab.

    It's fine to use that cab with your 7pro, but you need to be careful with the volume and turn down if you hear the cab struggling.
  3. RickenBoogie


    Jul 22, 2007
    Likes Received:
    +1 first off, forget wattage ratings. Just use common sense, and your ears. Yes, it's possible to toast that cab with the 7Pro, but that's no reason not to pair them. Just be sensible, and cautious, especially with any added low end. THAT will hurt the cab quicker than anything.
  4. jlepre

    jlepre Supporting Member

    Nov 12, 2007
    Likes Received:
    Great match. I would go for it. I've owned that same cab and pushed 600 watts with no struggles at all. Listen to the cab, and don't overdue it.

Share This Page