1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Bartolini NTBT-918 Questions

Discussion in 'Pickups & Electronics [BG]' started by Arvin, Feb 22, 2014.

  1. Arvin

    Arvin Underwound Supporting Member

    Joined:
    Sep 26, 2008
    Likes Received:
    0
    I've got an NTBT-918 which was originally wired:

    Master volume
    Blend
    Stacked Bass/Treble

    Pretty much like this diagram:

    http://www.bartolini.net/wp-content/uploads/2013/12/NTBT-918.pdf

    Will it work if I replace the blend with individual pickup volumes, and remove the master volume (output straight to the jack)? Are there any problems with that configuration?

    Thanks
  2. JustForSport

    JustForSport

    Joined:
    Nov 17, 2011
    Likes Received:
    0
    Maybe just a 25k resistor in place of Master vol pot-
    But good question...
  3. Arvin

    Arvin Underwound Supporting Member

    Joined:
    Sep 26, 2008
    Likes Received:
    0
    Bumping for goodness.
  4. CrashClint

    CrashClint I Play Bass therefore I Am Supporting Member

    Joined:
    Nov 15, 2005
    Likes Received:
    0
    There is another post about removing the Volume and wiring full-on volume.

Share This Page