Bridges that Fit Under Jazz Bass Cover ?

Discussion in 'Hardware, Setup & Repair [BG]' started by FLICKOFLASH, Mar 23, 2014.


  1. FLICKOFLASH

    FLICKOFLASH

    Joined:
    Mar 23, 2014
    Messages:
    39
    Starting a build and have seen some high mass bridges coming out from Fender but noone ever mentions if they fit under traditional bridge covers.Anyone have a nonstock bridge under your cover ?:help:
     
  2. FLICKOFLASH

    FLICKOFLASH

    Joined:
    Mar 23, 2014
    Messages:
    39
    I just got one of the no branding bridge plates from china and wanted to share that they are 1/4' taller than a branded fender one. China one is 1" Fender is 3/4" which may work with some bridges
     
  3. sissy kathy

    sissy kathy Supporting Member

    Joined:
    Apr 21, 2014
    Messages:
    257
    Location:
    Halethorpe, MD
    I just removed a high mass bridge from a used PJ I bought because it WOULD'NT fit under the bridge cover (this isn't strictly true, I could have moved the HMB forward a half inch and then it would have fit but; it also raised the action so much I just went back to stock.)
     
  4. FLICKOFLASH

    FLICKOFLASH

    Joined:
    Mar 23, 2014
    Messages:
    39
    Thinking of going with a 2tek bridge
     
  5. Register to disable this ad

Share This Page