1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. We are currently evaluating the "One Post Per Classified Ad" policy. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Building a Bass Guitar......

Discussion in 'Luthier's Corner' started by ZenG, Dec 17, 2013.

  1. ZenG

    ZenG

    Joined:
    Dec 13, 2013
    Likes Received:
    0
    At some point down the road I want to try building my own bass.


    Rather than build each piece from scratch, I would be more interested in putting together pieces that have already been produced.

    Are there sites/places that sell precut body blanks, necks etc?

    The electronics seem to be readily available.
  2. RxFunk

    RxFunk

    Joined:
    Dec 2, 2012
    Likes Received:
    0
    Allparts, warmoth, carvin, musiciansfriend sells mighty mite parts. I'm pretty sure fender sells official parts direct from their site now as well. There's tons of places that sell parts, these are just a few from the top of my head.
  3. Maxwell Badger

    Maxwell Badger

    Joined:
    Aug 16, 2013
    Likes Received:
    0
    I priced a warmouth precision style bass. Added up to over a grand easy. Would be fun to do. I currently build most all of my own parts. Just not fender precision. I'd recommend the warmouth site. Should you decide to sell it off. There stuff seems to hold value. Good luck and if you have any ?. Send me an email.

Share This Page