1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Carvin Control Cavity Depth

Discussion in 'Pickups & Electronics [BG]' started by tink9975, Jul 9, 2012.

  1. tink9975

    tink9975 Supporting Member

    Joined:
    Aug 10, 2006
    Likes Received:
    0
    Does anyone know what the control cavity depth is on the Carvin LB series basses? I am thinking about getting a Flexcore for my LB75 but I am not sure if it has the 1 1/4 inch depth required.
    The Carvin website lists the body as 1 5/8ths thick, so I am thinking it might be a tight squeeze.
  2. tink9975

    tink9975 Supporting Member

    Joined:
    Aug 10, 2006
    Likes Received:
    0
    so for anyone interested, I measured the cavity at 1 1/2 inches deep, and noticed that the existing preamp has components similar to the ones in the flexcore. I ordered it and should have it in a week or two.
  3. dece

    dece Supporting Member

    Joined:
    Sep 7, 2007
    Likes Received:
    0
    How did that workout for you?

Share This Page