Changing the heads on patch leads help!

Discussion in 'Effects [BG]' started by Mattbass97, Jan 21, 2013.


  1. Mattbass97

    Mattbass97

    Joined:
    Apr 9, 2011
    Messages:
    523
    I'm it sure if this Is where it's supposed to be, so please move if necessary.

    Anyway on my board I have a cable that's roughly 90cm that goes diagonally across my board that hooks up the bottom row with the top row of effects, pretty simple. Now I also have some spare 6" pancake head patch leads. My question is, is it possible to cut off the bulky heads on the 90cm cable and replace it with the heads from the pancake patch leads?

    Thanks
     
  2. cheapbasslovin

    cheapbasslovin

    Joined:
    Oct 28, 2007
    Messages:
    3,201
    Media:
    3
    Albums:
    1
    Location:
    Portland, OR
    Yes, but you need to get handy with a soldering iron first. It's probably not worth it for one patch lead. If you're going to start working on some projects more often in the near future then pick yourself up a soldering iron and some solder and watch some you tube tutorials.
     
  3. Mattbass97

    Mattbass97

    Joined:
    Apr 9, 2011
    Messages:
    523
    I'm past that it's all good
     

Share This Page