1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Crown XTI2000 1600w bridged at 8 Ohms, <20lbs-trade for cab or FS

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by lomo, Jan 6, 2013.

Thread Status:
Not open for further replies.
  1. lomo

    lomo passionate hack Gold Supporting Member

    Rating - 100%
    164   0   0

    Joined:
    Apr 15, 2006
    Likes Received:
    3
    Was in our PA rack but we have gone to powered monitors. Has seen light action (20 gigs over a little over 2 years) and racked the whole time. Faceplate pristine, minimal rash on top plate, no dings, dents or issues.

    350 shipped CONUS from NY or picked up in Montreal, or trade +$$ towards a micro head (at least 300 watts into 8 Ohms) or lightish 112 cab.

    Paypal OK.




    Specs (more online):

    XTi 2000 Power:
    8 ohms: 475W
    4 ohms: 800W
    2 ohms: 1000W
    8 ohms bridged to mono: 1600W
    4 ohms bridged to mono: 2000W


    Voltage Gain at 1kHz, 8 ohm rated output:
    XTi 1000: 30.5 dB
    XTi 2000: 32.9 dB
    XTi 4000: 34.2 dB

    - Frequency Response: +/-0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms
    - Phase Response (at 1 watt, 20 Hz to 20 kHz): +/-15 degrees
    - Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode
    - Sensitivity: 1.4V
    - Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 105 dB (A weighted)
    - Damping Factor: Better than 500 from 20 Hz to 500 Hz
    - Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz
    - Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz
    - Input Stage: Input is electronically balanced and employs precision 1% resistors
    - Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced
    - Maximum Input Signal: +22 dBu typical
    - AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz
  2. rotis

    rotis There is more

    Rating - 100%
    3   0   0

    Joined:
    Dec 28, 2011
    Likes Received:
    0
    8 ohms bridged to mono: 1600W

    Is that for real?
  3. lomo

    lomo passionate hack Gold Supporting Member

    Rating - 100%
    164   0   0

    Joined:
    Apr 15, 2006
    Likes Received:
    3
    Yup. It's not as much energy as the sun, but it'll tan your ears if that's the goal. Excellent for running a large cab from 1 side, PA monitors, etc.
  4. zawinals

    zawinals

    Rating - 100%
    6   0   0

    Joined:
    Dec 15, 2010
    Likes Received:
    0
    Pics? Thanks!
  5. lomo

    lomo passionate hack Gold Supporting Member

    Rating - 100%
    164   0   0

    Joined:
    Apr 15, 2006
    Likes Received:
    3
    pics as promised. Faceplate pristine. A little rack rash on top. No issues. Price dropped.

    Attached Files:

  6. lomo

    lomo passionate hack Gold Supporting Member

    Rating - 100%
    164   0   0

    Joined:
    Apr 15, 2006
    Likes Received:
    3
  7. Baird6869

    Baird6869 Supporting Member

    Rating - 100%
    51   0   0

    Joined:
    Feb 16, 2007
    Likes Received:
    6
    PMed.

    We can likely do a deal if the input sensitivity matches well with my Preamp....
  8. lomo

    lomo passionate hack Gold Supporting Member

    Rating - 100%
    164   0   0

    Joined:
    Apr 15, 2006
    Likes Received:
    3
Thread Status:
Not open for further replies.

Share This Page