1. Welcome to TalkBass, the Premier Bass Player Community and Information Source. Register a FREE Account to post and unlock tons of features!

Dano Fab Chorus Powering Question

Discussion in 'Effects [BG]' started by Cornelius Dawse, Feb 12, 2013.


  1. Greetings, lads! I just bought a Danelectro FAB Chorus (seriously, guys, it's one of the best Chorus I ever played, and I paid 20 bucks for it!), and in the manual (as well as on the pedal), they say ''no more than 300mA''. The thing is: I use a 1000mA wall wart with a daisy chain, with which I power all my pedals... Would I have to use a different adaptor just for this one pedal?
    Thanks in advance!
     
  2. as long as polarity of supply is correct the pedal will deaw what it needs so higher ma is fine lower is not good
     
  3. Sponsored by:

  4. Crystalman85

    Crystalman85

    Nov 30, 2008
    Chicago, Il.
    an ac adapter like the visual sounds 1-spot would power up the pedal fine. I would know because I once owned a danelectro fab chorus pedal and it works fine the 1-spot ac adapter. right now I own a danelectro cool cat cc-1 chorus pedal and it also works fine with the 1-spot ac adapter.
     



Share This Page