EMG PJHZ+BTC System issues

Discussion in 'Pickups & Electronics [BG]' started by BpcYT, Jan 3, 2014.


  1. BpcYT

    BpcYT

    Joined:
    Dec 9, 2013
    Messages:
    5
    Location:
    Novi, Michigan
    I have an EMG PJ HZ set in my bass, and today I tried soldering the connections to install an EMG BTC System. I was soldering one of the ground connections, when the piece on the board came off. I was soldering if this thing is still usable with the quick connect on the other side using their solderless connections, or if it's screwed for good. Thanks.

    here is a picture for reference.
    http://imgur.com/Uv1mUEv
     

Share This Page