EMG PJHZ+BTC System issues

Discussion in 'Pickups & Electronics [BG]' started by BpcYT, Jan 3, 2014.


  1. BpcYT

    BpcYT

    Joined:
    Dec 9, 2013
    Location:
    Novi, Michigan
    I have an EMG PJ HZ set in my bass, and today I tried soldering the connections to install an EMG BTC System. I was soldering one of the ground connections, when the piece on the board came off. I was sondering if this thing is still usable with the quick connect on the other side using their solderless connections, or if it's screwed for good. Thanks.

    here is a picture of the board for reference.
    http://imgur.com/Uv1mUEv
  2. Lownote38

    Lownote38

    Joined:
    Aug 8, 2013
    Location:
    Nashville, TN
    The piece to solder to came off? If so, you can still use the quick connects on the flipside of the board. If you don't have the quick connect cables, you can e-mail or call EMG and they will send you the quick connect type cables.
  3. BpcYT

    BpcYT

    Joined:
    Dec 9, 2013
    Location:
    Novi, Michigan
    Thank you very much, I was hoping I didn't destroy the thing completely...

Share This Page