1. Classifieds Rules, Usage Agreement, and FAQ

    A Supporting membership is required to post items for sale in the classifieds

    New posts to classifieds threads will only bump the thread once every 24 hours. Posts made before 24 hours since the last bump, will not bump the thread.

Fender Precision Bass Neck-MIM loaded.

Discussion in 'For Sale: Accessories' started by A-Step-Towards, Oct 27, 2012.


Thread Status:
Not open for further replies.
  1. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    This is a 1995 MIM fender black label precision bass neck. Maple neck, rosewood skunk stripe with a rosewood fretboard. Chrome inline butterfly tuners function well. String tree is original as well. Neck is stamped September 5th 1995. The neck is a 8/10. It has some light dings nothing drastic, frets are 90% there, you can feel the skunk stripe on the back a little in the upper frets register. Not uncommon with MIM necks as I have had a few like this. The frets were dirty and my 8 year old cousin was helping me clean the bass, I told him to use steel wool 0000, very fine steel wool to clean the frets. I got a phone call and forgot to tell him to tape the board , thus there are some light scratches on the fretboard-it was my fault and I did the same thing first time I cleaned frets on a bass. The good thing is it doesnt effect functionality , the frets are clean and the scratches are very light and not noticable unless up close.




    $140 shipped loaded with a neckplate CONUS



    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
  2. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  3. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  4. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  5. Register to disable this ad
  6. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  7. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  8. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  9. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  10. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  11. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  12. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  13. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  14. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  15. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  16. chuck norriss

    chuck norriss Supporting Member

    Joined:
    Jan 20, 2011
    You might even it out w/ boiled linseed oil. Rub it in. Have you tried spit shine? That might work too
  17. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    I was going to try lemon oil but sadly ran out, I need to buy some anyways. I havent tried spit yet :)
  18. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    ttt

    offers anyone?
  19. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  20. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  21. MeLikeBass

    MeLikeBass Supporting Member

    Joined:
    Oct 20, 2010
    Location:
    Indianapolis, IN
    Was wondering, What does it measure at the nut? Thx

Thread Status:
Not open for further replies.

Share This Page