1. Register your FREE Account to post and unlock tons of features!

flood

Discussion in 'Basses [BG]' started by ericf1, Apr 13, 2014.


  1. ericf1

    ericf1

    Jul 18, 2013
    All my gear is in my basement, last week we had a flood. My sons Bronco bass (short scale) was on a stand and water got in the input jack and to the bridge. Some of the screws are a bit rusty and thereis a small crack in the body. Nothing major, it seems to play fine, for now.
    next...my Broncos 40 amp got water inside it and on the speaker. I haven't plugged it in yet (hoping it will dry).
    Third....my Peavey Grind was in it's case....which was floating on top of the water and seems to be completely dry.
    Any advice on what I should do/replace? Insurance isn't touching this.
     
  2. lowfreq33

    lowfreq33

    Jan 27, 2010
    Nashville
    Disclosures:
    Endorsing Artist: Genz Benz Amplification
    Leave the amp out in the sun for a few days. If you can remove the head from the chassis and open it up it will help dry it out. If it wasn't plugged into the wall it's probably ok. Any speakers that were soaked may need to be replaced though.
     
  3. Sponsored by:




Share This Page