SOLD FS: Eden rig (WT550, 210xst, 210xlt)

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by isis07, Feb 10, 2014.


Thread Status:
Not open for further replies.
  1. isis07

    isis07 Supporting Member

    Joined:
    Mar 29, 2011
    Messages:
    22
    Location:
    Virginia
    Hello TB'ers! I'm selling my entire Eden rig. It consists of a WT550, 210xst, and 210xlt. It sounds beautiful but I haven't used it for months as I just find myself running DI at shows.

    I can look into shipping options and splitting it up, but I'd like to find sales local to MD/VA/DC if possible. I don't mind driving a couple hundred miles within this area to meet up.


    The WT550 head is a made in China version although I've had zero issues with. There is a tiny bit of rack rash on the front/top portion but it's otherwise in like new condition.
    [​IMG]

    The 210xst and 210xlt cab are both 8ohm. The XLT is made in the USA and features the banana plugs. The XST features a speakon connector but doesn't specify the build location (guess it's made in China). Both cabs sounds great individually and even better together! The XLT does have some small dents on the grill and both cabs have a bit of rash on the corner protectors from being placed on concrete/side walks.
    [​IMG]

    Additional photos can be found here.

    All components of this rig have remained in smoke free environments and the head will include the gator 3ru case and speaker cables. Looking to get $800 for the entire rig.
     
  2. bobcruz

    bobcruz

    Joined:
    Mar 10, 2004
    Messages:
    1,141
    Location:
    Alameda, CA
    Great price on a great rig! Eden's David series cabinets have always been made in the USA, FYI.

    You'll get some attention at the Eden Forum if you post your rig for sale there also:

    http://www.edenampsforum.com/

    Good luck, Bob
     
  3. tbz

    tbz Supporting Member

    Joined:
    Jun 28, 2013
    Messages:
    1,049
    Location:
    SoCal
    Good setup; that'd be a decent price for the XST and 550 alone!
     
  4. isis07

    isis07 Supporting Member

    Joined:
    Mar 29, 2011
    Messages:
    22
    Location:
    Virginia
    I had totally forgotten about the Eden forums. Great call. Thanks!
     
  5. Register to disable this ad
  6. bobcruz

    bobcruz

    Joined:
    Mar 10, 2004
    Messages:
    1,141
    Location:
    Alameda, CA
    Yeah, that's a really popular setup for Eden users; should get some action at that price.
     
  7. KablesP

    KablesP

    Joined:
    Oct 29, 2013
    Messages:
    239
    If you end up splitting it up, I am very interested in the XST.
     
  8. bassman28

    bassman28 Supporting Member

    Joined:
    Dec 31, 2010
    Messages:
    1,631
    Location:
    North Carolina
    I'd like the head.
     
  9. midichlorine

    midichlorine Supporting Member

    Joined:
    Jun 15, 2005
    Messages:
    1,051
    weird,

    why in the pic does it say 4 ohm minimum?
     
  10. isis07

    isis07 Supporting Member

    Joined:
    Mar 29, 2011
    Messages:
    22
    Location:
    Virginia
    Good question. After some quick googling I have no answer as to why it's not listed with the 2ohm minimum that others appear to be. I also wish I had saved the owners manual now....

    I currently have interest in this being sold as a full rig but if that falls through, I'll send out pm's in regards to splitting it up.
    Thanks!!
     
  11. bobcruz

    bobcruz

    Joined:
    Mar 10, 2004
    Messages:
    1,141
    Location:
    Alameda, CA
    That is classic Eden--typos on the cabinets and heads are STILL common. Some things never change....:rollno:

    Fear not, the 550s will run at 2 ohms all night.
     
  12. MrLenny1

    MrLenny1 Supporting Member

    Joined:
    Jan 17, 2009
    Messages:
    3,091
    Location:
    N.H.
    The 550 is rated for 8,4 & 2 ohms.
    This is the deal of the week for sure.
    GLWTS

    Eden owner.
     
  13. RDUB

    RDUB Supporting Member

    Joined:
    Dec 9, 2008
    Messages:
    1,091
    Location:
    London, Ontario, Canada
    Bump for an excellent system. Good price, and there are not many gigs this won't cover.
     
  14. KablesP

    KablesP

    Joined:
    Oct 29, 2013
    Messages:
    239
    Have any interest in splitting this up?
     
  15. isis07

    isis07 Supporting Member

    Joined:
    Mar 29, 2011
    Messages:
    22
    Location:
    Virginia
    I've just sold the entire rig to a local buyer for the asking price. Thanks for the interest and positive feedback TB!
     

Thread Status:
Not open for further replies.

Share This Page