FS/FT AMI RP/MM fretless / trans red nitro

Discussion in 'For Sale: Bass Guitars' started by Montanamike, Apr 14, 2014.


  1. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.
    Price:
    1300
    Strings:
    4
    Frets?:
    Fretless
    Location:
    Montana
    This is one of the Basses that I (Atkinson Music, Inc) built a few years back, It has all the best components and a killer tone. The Meh-wah and silky playability make it one of the finest basses you will ever play. This is far below the price of the components. There are a couple of small scratches. Unfortunately I play 5 string now.

    •USA custom guitars body and neck
    •9.2 lbs
    •Ebony board with Maple lines, fretless, 9" radius
    •Neck gunstock oil / wax finish
    •Schaller tuners
    •Hipshot d-tuner
    •Swamp ash body, P shape, hand rubbed nitro finish
    •Aguilar OBP-3 Preamp 400 / 800 mid switch (18 volt)
    •Vintage tone control
    •Blend
    •Seymour Duncan 1/4 pound p pup, reverse P. E&A in the sweet spot
    •Seymour Duncan Ceramic MM pickup in the sweet spot
    •Leo Quan Bad ass 2 bridge
    •Music Man hard case

    $1300 shipped in the ConUSA. Paypal OK

    Trades are limited to 34" scale, 5 strings

    [​IMG] [​IMG]

    [​IMG] [​IMG] [​IMG]

    Thanks for looking
    Last edited: Apr 16, 2014
  2. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.
  3. BassEnvy78

    BassEnvy78

    Joined:
    Jun 28, 2012
    The Tony Franklin killer. GLWTS
  4. BassEnvy78

    BassEnvy78

    Joined:
    Jun 28, 2012
    Do you have any sound clips btw?
  5. Register to disable this ad
  6. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.
    I will post a sound clip soon
  7. tommybass64

    tommybass64

    Joined:
    Jun 23, 2008
    Location:
    Oregon
    Man,that thing is gorgeous!...What is on top of the hand rubbed rubbed nitro to give it that sheen? Looks like you have the P pickup reversed so the g & d strings won't sound choked when mixed with the bucker....cool!....Is the nut width 1-1/2" or 1-5/8 ?"....looks like if I had in extra $1300 to drop I would seriously consider this....bump for a cool and original tone machine...GLWTS...!
    Last edited: Apr 20, 2014
  8. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.
    The finish was taken to 2000 grit then a 5 stage polish process ending with 100% carnuba wax. It is a 1.5 nut; Jazz width. Awesome balance with these pups and the reversed P pup.

    Thanks for the kuddos. I am open for offers too.
  9. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.

Share This Page