SOLD FS/FT Carvin BRX10.2 Cab

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by ric4682, Mar 21, 2014.


Thread Status:
Not open for further replies.
  1. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    First off, this thing is a BEAST in terms of power handling and low end. Easily the best 2x10 I've ever played through. I'm just switching over to a more vintage sound and this cabinet is pretty modern sounding. Very durable truck bed liner-like covering.
    It's at least 50lbs so I'd rather not ship it but if the buys wants to pay for shipping then I'll consider. I'd say it's about 7.5/10 condition. There are some nicks and tiny gouges in the bed liner stuff.
    Asking $225 plus shipping.
    PM me for details/pictures. I'll hopefully be putting some up in the next couple of days.
    The only trades I'd be interested in would be an Ampeg 115LF or the 210 from the mini stacks. Or maybe a PF-500 or 800. With a little cash on my end depending.

    Here's what Carvin has to say about it:

    http://www.carvinguitars.com/products/BRX10.2
     
  2. alexer47

    alexer47

    Joined:
    Oct 31, 2011
    Messages:
    50
    Interested but where are you shipping from? Can you post the pics or send to me pm? Are there any significant scratches or gouges? Thinking of getting a Carvin Br210 new but this sounds like far better deal. Thanks
     
  3. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    I'll be shipping from Northern Michigan. I'll be putting some pics up later today. There's a few marks and gouges but they aren't too bad at all. I'll try to capture them in the photos.
     
  4. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    Here's some pics:

    ImageUploadedByTapatalk1395584977.901106.jpg

    ImageUploadedByTapatalk1395584915.784741.jpg

    Here's a tiny little split in the covering
    ImageUploadedByTapatalk1395585044.098691.jpg
     
  5. Register to disable this ad
  6. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    And some more:

    This is the back. It's a little dirty right now from a gig in a dusty old barn, but I'll wipe it down before it goes anywhere.
    ImageUploadedByTapatalk1395585293.698123.jpg

    Here's a teeny tiny chip in the back top edge:
    ImageUploadedByTapatalk1395585350.051453.jpg
     
  7. JeffLieby

    JeffLieby

    Joined:
    Dec 25, 2007
    Messages:
    541
    Location:
    Beaumont/Port Arthur, TX
    Free bump! I suspect this is a great cab, as I used to own 2 of the NEO version.

    They go low and will take all the power you can throw at them (I ran 2 with a Carvin B1500 and they just drank the 2000 watts or so in). All for not a lot of coin at all.

    Someone is going to be happy with this little beast.
     
  8. alexer47

    alexer47

    Joined:
    Oct 31, 2011
    Messages:
    50
    Can you estimate total cost w/ shipping to Indianapolis? Very interested but trying to decide buying this cab for a BX500 or just getting a BR210 with the amp for under 6 bills
     
  9. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    I'll get the dimensions and weight and stop by the UPS store tomorrow. What's your zip code?
     
  10. alexer47

    alexer47

    Joined:
    Oct 31, 2011
    Messages:
    50
  11. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    I got quoted on around $50 so if it's more than that I'll pay the difference.
     
  12. alexer47

    alexer47

    Joined:
    Oct 31, 2011
    Messages:
    50
    Do you have a paypal account or what would be the payment situation. Making a decision by tomorrow afternoon.
     
  13. ric4682

    ric4682

    Joined:
    Jul 2, 2008
    Messages:
    294
    And SOLD!!! Shipping tomorrow!
     

Thread Status:
Not open for further replies.

Share This Page