FS/FT: Guild Pilot

Discussion in 'For Sale: Bass Guitars' started by EdgeXXL, Feb 9, 2014.


Thread Status:
Not open for further replies.
  1. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    For Sale or Trade a beautiful Guild Pilot 4-string right-handed electric bass, made in the USA. This is a model SB-602 from 1991/92, with an extraordinary flamed maple body. A maple neck with a 22 fret rosewood fret board. The nut width is 1 1/2 inch with a 34" scale. All original parts and case. Grover tuners. Fully adjustable Guild roller bridge. 9 volt active P/J EMG pickups, with an incredible range of tone. The neck is perfect, and the frets are in excellent condition. The electronics/battery compartment is clean. No major nicks or dings – see the photos for the couple that I found. Some very minor scratches and dings on the front, but they do not go through the finish (You can only see them from the side, in the right light.) It comes with an original hard-sided form-fitting Guild Pilot case. The case shows a little wear after 20 years, but the latches work. This bass is very light and weighs 8 lbs 6 oz.

    I am really looking to sell this bass but possible trades I would be interested in are
    (willing to add $$ for the right trade)

    4 string models
    Stingray, Sterling,
    G&L JB2, SB1, SB2 US and Tribute models
    Lakland Skyline 44-01, 44-02, 44-64
    US or MIJ Fender P or J

    Please PM with any questions or trade offers.

    Price [DEL]$600[/DEL] [DEL]$560[/DEL] $500
    shipped

    Attached Files:

  2. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    More pictures.

    Attached Files:

  3. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Some more Pictures. I have the truss rod cover. (its not installed in the first picture).

    Attached Files:

  4. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Even more pictures. One of the small nicks is noticeable in the first picture by the bottom screw hole for the back plate.

    Attached Files:

  5. Register to disable this ad
  6. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Pictures of nicks and dents.

    First is a small dent on the bottom horn.
    Second is a very small nick near the bottom screw on the back plate.

    Attached Files:

  7. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Price change.
  8. bassman28

    bassman28 Supporting Member

    Joined:
    Dec 31, 2010
    Location:
    North Carolina
  9. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    PM answered
  10. WoodyG3

    WoodyG3 Supporting Member

    Joined:
    May 6, 2003
    Location:
    Colorado, USA
    Nice looking, for sure. What's the width at the nut?
  11. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    The nut width is 1 1/2 inch.
  12. emblymouse

    emblymouse I Dig A Pony Supporting Member

    Joined:
    Jan 22, 2006
    Location:
    W' Sconsin
    Disclosures:
    Endorsing Artist Lakland**Bag End**Schroeder
    That's a solid Flame maple body there folks! And looks like the neck is quartersawn to boot. Secretly awesome bass:ninja:
  13. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    This bass needs a new home people.
  14. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    I need to sell this bass so come on I know someone wants it. Price dropped to $500 shipped
  15. VifferMike

    VifferMike Registered Four Banger Supporting Member

    Joined:
    Dec 10, 2004
    Location:
    Dallas, Texas
    ... I'm looking for one of these. Right year, right condition, right headstock, pretty much right hardware, and though I'd ideally want a maple board, I can be fine with rosewood ... but it's the wrong color. :(

    GLWTS!
  16. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Too bad you're not looking for the Flamed Maple body because this bass is beautiful. It's also in excellent condition. If you can get over the color thing let's deal.
  17. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
  18. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Someone make me an offer on this thing I need to move it.
  19. tildeslash

    tildeslash Supporting Member

    Joined:
    Nov 9, 2012
  20. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona
    Deal pending
  21. EdgeXXL

    EdgeXXL Supporting Member

    Joined:
    Dec 13, 2013
    Location:
    Tucson Arizona

Thread Status:
Not open for further replies.

Share This Page