1. A Supporting membership is required to post items for sale in the classifieds

  2. Welcome to TalkBass, the Premier Bass Player Community and Information Source. Register a FREE Account to post and unlock tons of features!
  3. Please Read:Classifieds Rules, Usage Agreement, and FAQ for info on bumping, marking SOLD, and more.

  4. In addition to the drop-down search menu at the top-right of this page, you may also do an advanced search for even more accurate results. See this thread for more info

FS: Maple+Rosewood USACG Neck

Discussion in 'For Sale: Accessories' started by -=DanAtkinson=-, Feb 17, 2013.

Thread Status:
Not open for further replies.
  1. Brand new USACG neck, finished in Tru-Oil. Maple/Rosewood. Nut installed. Just needs tuners. I've had no problems spraying nitro over Tru-oil in the past, if that's your cup of tea. Or you can remove the Tru-oil easily with acetone.


    • Satin Tru-Oil finish
    • 1.625" nut
    • 9.5" radius
    • .800" thickness (thin)
    • Graphite reinforced
    • 6230 fretwire (vintage)
    • 20 frets
    • Fender USA nut
    • Rolled fingerboard edges
    • Standard 11/16" tuner holes

    This neck would be $260 from USACG, without finish and nut. I'll let it go for $200 shipped in the lower 48 states. No trades, no international shipping. Price is firm. Paypal is fine.

    I also have a body that would be a perfect match: http://www.talkbass.com/forum/f129/fs-custom-j-bass-body-958178/





  2. TimBosby

    TimBosby Gold Supporting Member

    Dec 19, 2004
    Omaha, NE, USA
    Nice. Clay dots?
  3. TalkBass Friendly Advertisement

  4. No, but they have the darker look of clay dots.
  5. flewis

    flewis Gold Supporting Member

    Mar 3, 2006
    Raleigh, NC
    A sweet deal on a nice neck!
  6. dregsfan

    dregsfan Supporting Member

    Sep 13, 2006
    May I say that my bass is a USACG P. body and a USACG Jazz neck, and it appears to me that it can't get much better. Very nice stuff. Couldn't be more pleased.
  7. Cyborg

    Cyborg Supporting Member

    Jul 7, 2007
    Lowcountry, SC
    Dang, too bad I don't have the geometry skills or a drill press to make the holes for the neck and tuner screws.
  8. Don't need a drill press. Just a drill and a steady hand! Mount the neck on the body and drill the neck holes through the body holes (of course you'd want to adjust the drill bit so it isn't long enough to drill through the fretboard). Same routine for the tuners.
  9. the headstock looks great. did you reshape it from the standard usacg shape?
  10. Indeed.
  11. beautiful work! still kicking myself for not buying a bass from you when you were offering them...

Thread Status:
Not open for further replies.

Share This Page

Can't find it on TalkBass?