1. Classifieds Rules, Usage Agreement, and FAQ

    A Supporting membership is required to post items for sale in the classifieds

    New posts to classifieds threads will only bump the thread once every 24 hours. Posts made before 24 hours since the last bump, will not bump the thread.

FS: Six basses

Discussion in 'For Sale: Bass Guitars' started by BBox Bass, Aug 23, 2013.


Thread Status:
Not open for further replies.
  1. BBox Bass

    BBox Bass Supporting Member

    Joined:
    Apr 2, 2011
    Location:
    NW Pennsylvania
    All basses are in good shape, clean, fully functional, set up, and ready to play! Prices do not include shipping. I will ship to US and Canada ONLY. Send me your ZIP/postal code and I will get a shipping quote.


    1. LTD 255-DX

    The seller described the color as gunmetal blue and claimed it was a factory sample, so I'm guessing there aren't many around that look like it. I bought the bass as a second after someone dropped it on the bottom point. My tech patched up and painted the bashed area. The part of the bridge that holds the D string in place was also damaged in the fall and can't be fixed. Oddly enough, the bridge has holes to allow for stringing through the body, but the body had no holes, so I had my tech drill some and install ferrules. Stringing through the body works fine, but doing so requires extra long strings since the scale is 35" (it currently has a set of D'Addario ProSteels). Be warned that if you want to string through the bridge, you will need to buy a new bridge. My tech looked the bass over and pronounced it fit aside from the damage I described. I gave it a setup and really like how it plays and sounds (good for metal, LOL), but one gig with this thing taught me that 10 pound basses and my shoulder don't get along very well. $300


    2. Aria Pro 2 XRB Series Electrics Fretless Bass

    This bass was most likely made in Korea in the 1990s (SN 8051313). The body has a factory blue/teal crackle finish that has a few small dings and scratches. It was a pawn shop special with bad frets, so I pulled them and had my tech fill the slots with plastic and then plane the fingerboard. It's straight and has nice low action. I strung it with GHS Brite Flats. There is a 3" wide discolored stripe (somewhat greenish) on the back of the body. My tech said it looks like the bass might have been previously owned by someone who played with his shirt off and his sweat reacted with the finish. Weighs 8.8 lbs. $130


    3. Yamaha BB405

    The previous owner broke the bridge pickup's volume pot. Instead of replacing it, they superglued it into the cavity, then bypassed the pot so that the neck pickup's pot ran both pickups (gotta lover Ebayers!). I replaced the bad pot and rewired everything correctly. I wet-sanded out the superglue reside around the pot's hole and polished it, but my polish job isn't perfect so the finish is a little hazy around the controls. Everything else is in good shape and the bass plays nice. I moved the bottom strap button to reduce the neck dive (it made a slight improvement). The neck is just a little chunky for my taste. $130


    4. Squier by Fender Precision Bass Made in Korea

    This bass was built in 1997, if my understanding of Squier serial numbers is accurate (SN 71356). It's all stock except for Wilkinson tuner upgrades, which are an improvement over the originals. The body has some small dings and scratches. I moved the bottom strap pin to reduce neck dive and filled the hole. Weighs 9.2 lbs. $130


    5. Squier Affinity by Fender 20th Anniversary Edition Bass Made in China

    This bass is all stock and I think was made in 2002 (SN CY20311184). The body has a few small dings and scratches, some of which I filled and painted. Weighs 8.4 lbs. $115


    6. Squier by Fender Jaguar Vintage Modified Humbucker Bass

    All stock, purchased new in 2011 (SN CS11021551), and barely used since then. I moved the bottom strap pin to reduce neck dive and filled the old screw hole. The neck still dives somewhat. Weighs 7.6 lbs. $120

    Attached Files:

  2. angrydad

    angrydad

    Joined:
    Jul 31, 2004
    Location:
    annville,pa.
    Pm'd you.
  3. Pills Are Yummy

    Pills Are Yummy

    Joined:
    Dec 6, 2012
    Location:
    Santa Rosa, California
    trade one of the Pbass's for a NIB Sansamp Paradriver?
  4. Idiot Savon

    Idiot Savon Tall, Dark, Handsome, etc., etc. Supporting Member

    Joined:
    Jun 22, 2009
    Location:
    New Haven, CT
    PM'd, forgot postal code (o6516)...sorry, I was distracted by the shiny.

Thread Status:
Not open for further replies.

Share This Page