FS: SX fretless Jazz neck with epoxied fingerboard

Discussion in 'For Sale: Accessories' started by fourstringbliss, Jan 15, 2013.


Thread Status:
Not open for further replies.
  1. fourstringbliss

    fourstringbliss Supporting Member

    Joined:
    Oct 5, 2003
    Messages:
    8,443
    Location:
    Puyallup, WA
    I defretted this SX Jazz neck and then coated it in epoxy. I radius sanded it smooth to 2400 grit and it plays really well - I'm just realizing that I'm not a fretless guy. I'd rather put a fretted neck back on the body this comes from. I installed a Hipshot string retainer and replaced the nut with a Tusq one.

    Here are the dimensions:

    Total length: 33 5/16"
    Width of the neck at the nut: 1 5/8"
    Width of the neck at the 12th fret: 2 1/4"
    Thickness of the neck at the first fret: 7/8"
    Thickness of the neck at the 12th fret: 15/16"
    Radius: 14"
    Neck pocket: 2 1/2" wide x 3/4" deep (not counting the fingerboard)
    Pre-cut holes for tuners: 1/2" in diameter

    I installed brass threaded inserts and will include the bolts on the off chance that they match up with your neck pocket holes.

    $50 shipped, CONUS.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Joe Milstein

    Joe Milstein Gold Supporting Member

    Joined:
    Dec 7, 2007
    Messages:
    1,460
    Location:
    Central New Jersey
    Disclosures:
    Gamma Bass Guitars
    Cool Neck. Great Deal. Very Slick.
     
  3. fourstringbliss

    fourstringbliss Supporting Member

    Joined:
    Oct 5, 2003
    Messages:
    8,443
    Location:
    Puyallup, WA
    Thanks! It's going to be a great neck for someone out there.
     
  4. fourstringbliss

    fourstringbliss Supporting Member

    Joined:
    Oct 5, 2003
    Messages:
    8,443
    Location:
    Puyallup, WA
    TTT

    You know one you SX guys wants this for a project bass!
     
  5. Register to disable this ad
  6. damon78

    damon78

    Joined:
    Nov 30, 2012
    Messages:
    59
    Will this drop in a Fender body?
     
  7. fourstringbliss

    fourstringbliss Supporting Member

    Joined:
    Oct 5, 2003
    Messages:
    8,443
    Location:
    Puyallup, WA
    Sorry about that! I forgot to mention that this has been traded.
     

Thread Status:
Not open for further replies.

Share This Page