Genz Benz/Eden Neutrik Speak On?

Discussion in 'Amps [BG]' started by HowBoutThat, Mar 3, 2014.


  1. HowBoutThat

    HowBoutThat

    Joined:
    Mar 3, 2014
    First post. I'm getting back into bass after 15+years and just assembled a pretty nice home rig (Shuttle 6.2 and Eden D210XLT8). I had already purchased 1/4 cables for everything, not knowing that the Neutrik thing had come around while I was off the grid. The GB Shuttle has the Neutrik outputs, but it appears the Eden cabinet has both Neutrik and 1/4 inch on the crossover plate. Which type of cable should I use, Neutrik to 1/4" or Neutrik to Neutrik?

    I apologize for this sounding so dopey, but this new stuff is confusing an old guy.
     
  2. ExaltBass

    ExaltBass Just a BassGuy! Gold Supporting Member

    Joined:
    Sep 28, 2006
    Location:
    Twin Cities, MN
    Disclosures:
    Crafter of XBass cables
    Neutrik to Neutrik... SpeakOn (from one old guy to another... the only way to fly)
     
  3. ddhm

    ddhm

    Joined:
    Mar 18, 2011
    Location:
    Memphis Tn USA
    +1
     
  4. RapidRoy

    RapidRoy

    Joined:
    Feb 27, 2013
    I have a GB Streamliner 900 and GB says anything over 400 watts should be using the speakon... and yep I agree ... speakon is the only way to go!
     
  5. Register to disable this ad

Share This Page