1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

GK MB200 with 210 Cab & 115 Cab

Discussion in 'Basses [BG]' started by SiriusBlack, Dec 2, 2013.

  1. SiriusBlack


    Nov 29, 2011
    Likes Received:
    Hi all. I looked for an answer about this on TB but could not find it :-(

    So, here goes. I have a GK MB200 head and I am about to buy an Ashdown MAG 210T cab and a Ashdown MAG 115 cab.

    GK MB200 has one output 200W at 4 ohm, and both Ashdown cabs (they are both 8 ohm) have a speakon input and a jack input.

    How do I connect the rig together please?

  2. tjh

    tjh Supporting Member

    Mar 22, 2006
    Likes Received:
    Run one SPEAKER cable from head to 1st cab (either speakon or 1/4" ends) and then one cable from that cab to 2nd cab (opposite connector of previous cable) ...

    if you have a speakon to speakon SPEAKER cable and a 1/4 to 1/4 SPEAKER cable, you can do this that way ... depending on which MB200 you have, would determine which cable you start with from the head ... but both versions of MB200 will accept Speakon, both will not accept 1/4"

    you will also have more looks at this thread in 'Amps' forum ;)

Share This Page