Help wiring diagram needed for noll!

Discussion in 'Pickups & Electronics [BG]' started by Rapisme, Apr 5, 2014.


  1. Rapisme

    Rapisme Supporting Member

    Joined:
    Dec 5, 2007
    Messages:
    3,810
    Location:
    RAPISME
  2. i_got_a_mohawk

    i_got_a_mohawk

    Joined:
    Feb 9, 2005
    Messages:
    17,476
    Location:
    Edinburgh & Dundee, Scotland
    Are all the pots etc. still attached, as per the picture in the thread?

    What kinda bass is it going in?

    If so I suspect you'd just hook the +ves from each pickup to the balance pot and the -ves to ground, everything else is done for you?
     
  3. Rapisme

    Rapisme Supporting Member

    Joined:
    Dec 5, 2007
    Messages:
    3,810
    Location:
    RAPISME
    Jazz bass...the preamp is like the picture only thing is that 2 wires for the vol/bal stack in the center are attached. If I just had the diagram this would answer my question..

    Sadly the noll site isn't very helpful. My gosh!
     
  4. Rapisme

    Rapisme Supporting Member

    Joined:
    Dec 5, 2007
    Messages:
    3,810
    Location:
    RAPISME
    Pic
     

    Attached Files:

  5. Register to disable this ad
  6. ex-tension

    ex-tension

    Joined:
    Jun 11, 2009
    Messages:
    337
    It looks like it's a vol/bal pot+push/pull switch (probably for active/passive switching).
    http://www.banzaimusic.com/MEC-M-89552-Stacked-Switched-Pot.html

    So, the bottom of the pot is the switch. Right next to it, the vol pot lugs. And then the balance pot lugs. Looks like everything is wired and ready. As i_got_a_mohawk said, you only need to connect your pickup + wires to the balance pot. And pickup - wires to the ground. (And of course the bridge wire to the ground.)

    See a common balance pot wiring here:
    http://tclutherie.hypermart.net/wiring/2JBWITHBLEND.jpg
     
  7. BassLife77

    BassLife77

    Joined:
    Nov 13, 2009
    Messages:
    813
    Location:
    San Diego
  8. Rapisme

    Rapisme Supporting Member

    Joined:
    Dec 5, 2007
    Messages:
    3,810
    Location:
    RAPISME
  9. fruitlabor

    fruitlabor

    Joined:
    Apr 6, 2007
    Messages:
    860
    Contact Noll. They are very helpful. Atleast they have been every time I've had a question
     
  10. Rapisme

    Rapisme Supporting Member

    Joined:
    Dec 5, 2007
    Messages:
    3,810
    Location:
    RAPISME
    It's under hausell now.. Yeah that's a thought got it to work just waiting on the battery as well as some basstec pups coming shortly.
     

Share This Page