1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Lefty Wiring harness for a P-Bass

Discussion in 'For Sale: Accessories' started by FuryGuy, Feb 17, 2014.

Thread Status:
Not open for further replies.
  1. FuryGuy

    FuryGuy Supporting Member

    Rating - 100%
    12   0   0

    Joined:
    Sep 25, 2012
    Likes Received:
    0
    For Sale Only (no trade interest).

    Wiring harness for a left handed P-Bass. The pots are 250K (made by Alpha) and the jack is a Switchcraft. It was professionally soldered and is correct for a left handed bass. The pots are 3/8 inch solid shaft in new condition. I had this bass wired up to sell but have decided to part it out, so the pots and jack are basically new. The mounting nuts and washers are included, just solder in your favorite pickup.

    Asking $20 shipped to Canada or the Lower 48 States.

    [​IMG]

    [​IMG]
  2. FuryGuy

    FuryGuy Supporting Member

    Rating - 100%
    12   0   0

    Joined:
    Sep 25, 2012
    Likes Received:
    0
  3. funkbass187

    funkbass187

    Rating - 100%
    5   0   0

    Joined:
    Jan 13, 2006
    Likes Received:
    0
    Just curious, how is it any different from a right handed harness?
  4. FuryGuy

    FuryGuy Supporting Member

    Rating - 100%
    12   0   0

    Joined:
    Sep 25, 2012
    Likes Received:
    0
    This is out of a left handed P bass. My tech wired it opposite to the diagram that he followed from Seymour Duncan to make the volume and tone pots work properly. I could be changed to a right hand configuration but it would need to be re-soldered. That's my understanding anyway.
  5. FuryGuy

    FuryGuy Supporting Member

    Rating - 100%
    12   0   0

    Joined:
    Sep 25, 2012
    Likes Received:
    0
Thread Status:
Not open for further replies.

Share This Page