1. A Supporting membership is required to post items for sale in the classifieds

  2. Classifieds Rules, Usage Agreement, and FAQ


    New posts to classifieds threads will only bump the thread once every 24 hours. Posts made before 24 hours since the last bump, will not bump the thread.

    To mark your thread sold, edit the title and choose the "SOLD" prefix. See the FAQ for more info

luthier supply

Discussion in 'For Sale: Accessories' started by strangedejavu, Jan 2, 2014.


  1. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    I am no longer building guitars so I am selling a bunch of stuff in a lot.

    First off I have a few luthier tools:
    -Fret guru 16" precisian sanding beam for fret leveling (paid 50)
    -steel fingerboard guard
    -stewmac end cutters for frets (I am pretty sure I just have to track them down)
    -fret tang nipper (either stewmac or lmii, once again I will check tomorrow night after I track it down)
    -over 20 feet of stewmac jumbo fretwire (I will get the details tomorrow night once I get to the shop)

    Parts:
    -small roll of white pearloid celluloid binding (super hard to find)
    -carvin aluminum 6 string bridge with brass saddles
    -carvin flush mount input jacks brand new in black
    -carvin 6 string graphtech nuts narrow spacing x 2
    -hipshot headstock string tree, black holds 4 strings (can be used for 4-6 string basses)
    -two guitar bone nuts slotted
    -one desert iron wood nut blank
    -gold fat finger, used for adding mass to the headstock and improves sustain on guitar and bass headstocks (paid 40)
    -Schaller style gold strap locks
    -two rosewood knobs with dot inlays
    -1 dual truss rod for bass necks brand new
    -a bunch of various tuning machines
    -a bunch of neck plate screws
    -a bunch of pickguard screws

    looking for $100obo plus shipping for the whole lot (assuming I can track down the other tools and the fretwire, will know tomorrow night)
  2. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
  3. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    not everything listed is in the pictures, will try to get to the shop and get pictures of everything tomorrow around 7pm... I might also have some fretboard scales for slotting (plastic), pots and caps etc for a little extra $$.
  4. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    added some carvin flush mount input jacks
  5. Register to disable this ad
  6. warnan

    warnan

    Joined:
    Mar 1, 2004
    Location:
    Shanghai,China
    wow,how much will u charge the spalted flame maple table.
  7. flauius

    flauius

    Joined:
    Mar 8, 2013
    Location:
    Belo Horizonte - Brazil
    Hi, are you comfortable with oversears?
  8. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    Hah, that table is my baby. Its a 3" thick, 24" wide and 5 foot long piece of extremely flamed maple, the base is done with 12/4 AAAA maple too.

    Yes I would have no problem shipping overseas as long as you pay all fees. I will try to compile a larger list. I get this feeling that I have TONS more stuff in my shop that I can add to the list. I will get pictures up around 8 or 9 tonight. I for sure have some slotting templates, a bunch of pots, knobs, fretwire, maybe some other tools etc. I think I might even have a stewmac fretpress caul too.
  9. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    sale pending.
  10. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    First off I have a few luthier tools:
    -stewmac fret caul with 4 brass inserts, only used once (paid 55)
    -Fret guru 16" precisian sanding beam for fret leveling (paid 50)
    -steel fingerboard guard (paid 5.00)
    -guitar neck rest made of wood and cork (paid 15)
    -stewmac end cutters for frets (I am pretty sure I just have to track them down) (paid 30)
    -over 20 feet of stewmac medium fretwire, all in straight lengths and a bunch of small cut offs... (paid 30)
    -guitar slotting templates dual sided 30, 35, 34, 32 (two of the templates are broken one in the middle the other at the nut slot, could easily be super glued together these are made out of plexi glass, (paid 25 or 30 a template)
    -stemac double edged crowning file (paid 40)


    Parts:
    -tons of abalone, mother of pearl front face dots (over 125 maybe more, I want to say there is more like 150-175 there but I am too lazy to count, I bought them in 100 packs) and a bunch of abalone side dots (paid .40-.75 cents a piece for these!!!)

    -two pieces of white pearloid celluloid binding (super hard to find, paid 30 for the two pieces)
    -brand new hipshot vintage chrome guitar bridge brass super heavy (paid 65)
    -carvin aluminum 6 string bridge with brass saddles (paid 40)
    -carvin flush mount input jacks brand new in black (paid 10 each)
    -4 telecaster style electrosocket jacks brand new chrome, minus screws (paid 8 each)
    -Dunlop black straplocks
    -bigsby gold spring
    -bushings and washers for gotoh reso-lite tuning machines (good amount of them)
    -a couple pickup rings
    -a p90 pickup cover
    -carvin 6 string graphtech nuts narrow spacing x 2
    -hipshot headstock string tree, black holds 4 strings (can be used for 4-6 string basses)
    -two guitar bone nuts slotted
    -one desert iron wood nut blank
    -gold fat finger, used for adding mass to the headstock and improves sustain on guitar and bass headstocks (paid 40)
    -Schaller style gold strap locks
    -two rosewood knobs with dot inlays
    -1 dual truss rod for bass necks brand new
    -a bunch of various tuning machines
    -a bunch of neck plate screws

    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
  11. strangedejavu

    strangedejavu Supporting Member

    Joined:
    Apr 10, 2009
    Media:
    1
    Location:
    Bellingham, WA
    thinking with the added stuff, tools and fretdots, 150 plus shipping is fair, I roughly paid close to 400 for everything, I might find more stuff to throw in too, will take a good look around before I ship
  12. Darmatyoru

    Darmatyoru Gold Supporting Member

    Joined:
    Dec 19, 2012
    Location:
    Tx

    I'll take it... Pm sent
  13. Montanamike

    Montanamike Supporting Member

    Joined:
    Dec 23, 2009
    Location:
    Billings, Montana USA
    Disclosures:
    Owner: Atkinson Music, Inc.
    I'll take it if Dar doesn't want it. I really want the beam and tools.
  14. ChrisCassisi

    ChrisCassisi

    Joined:
    Mar 24, 2011
    Location:
    San Jose, CA
    Disclosures:
    Tone Bastards Cables
    Put me in line. If both fall through I will buy in a heartbeat.
  15. MarkA

    MarkA Registered Schmoozer. Supporting Member

    Joined:
    Sep 26, 2008
    Okay, fat, fat chance, but I might as well cue up!

    Call me maybe? ;)

Share This Page