Made In Korea Squier BULLET BASS loaded neck...a beauty!

Discussion in 'For Sale: Accessories' started by MasterBass!, Dec 9, 2012.


Thread Status:
Not open for further replies.
  1. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    $125 shipped FREE!!


    I got this neck (and its original body) from a music store that was closing a while back, and never got to assemble the bass. Its one of those super E-series Made In Korea Bullet Bass necks, fully loaded. Its a standard Precision Bass width nut, but has a much thinner profile...just a really nice feeling neck. There is very little wear on the frets, they are bright and shiney and the rosewood is very nice too. The truss rod turns smoothly and I even got the original truss rod wrench with it. It has the nice original heavier cast tuners. Just a couple very small nicks on the headstock and thats it.

    Asking $150 shipped.......or make offer

    (the matching loaded body is also for sale on another TB ad) Buy them both at a discount!
     
  2. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
  3. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    Swap for a maple Fender Jazz or Geddy Lee neck plus cash from me.
     
  4. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    Now....$125 and shipped FREE conus!!

    Jazz neck (1.5") trades are also fine!!
     
  5. Register to disable this ad
  6. Joe Milstein

    Joe Milstein

    Joined:
    Dec 7, 2007
    Messages:
    1,462
    Location:
    Central New Jersey
    Disclosures:
    Gamma Bass Guitars
  7. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    I can use a Jazz neck trade !!
     
  8. Tommygunn

    Tommygunn

    Joined:
    Nov 8, 2008
    Messages:
    7,122
    Location:
    Houston, Tx
    I have some stuff I can trade. PM if interested.
     
  9. tony moore

    tony moore

    Joined:
    Apr 8, 2000
    Messages:
    663
    Location:
    Cincinnati, Ohio, USA
    what are the heel dimensions? will it fit current precision or jazz bass bodies? thanks.
     
  10. Joe Milstein

    Joe Milstein

    Joined:
    Dec 7, 2007
    Messages:
    1,462
    Location:
    Central New Jersey
    Disclosures:
    Gamma Bass Guitars
    Super Necks! Feel great!
     
  11. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    I honestly didn't measure it, but it fits MIM's and a Geddy body just like it was made for it....
     
  12. saaronanderson

    saaronanderson Supporting Member

    Joined:
    Mar 6, 2012
    Messages:
    379
    Location:
    Savannah
    I'm pretty sure it's 2.5". I have the body and a 2 7/16 neck was a bit loose in the pocket. That said, i have occasionally seen a 2 5/8 on some.
     
  13. MasterBass!

    MasterBass! Reaching new Highs in Lows!! Supporting Member

    Joined:
    Dec 6, 2009
    Messages:
    4,658
    Location:
    Lehigh Valley, PA, USA, Earth
    *** SOLD *** and heading to Ohio in the morning! Thanks Tony!!
     

Thread Status:
Not open for further replies.

Share This Page