1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Noise with EMG active pickups and BQS preamp

Discussion in 'Pickups & Electronics [BG]' started by lucianom, Dec 23, 2013.

  1. lucianom

    lucianom

    Joined:
    May 31, 2009
    Likes Received:
    0
    There's been a bit of noise when I leave at maximum the treble potentiometer of a BQS system (noise starts at 75% of treble) with active EMG pickups that I recently installed. I did not soldered the wire bridge and preamp cavity is shielded with copper. This is normal, since EMG pickups are noiseless?
    Another question, when I get near the bass of a notebook and a TV, I listen to a lot of interference, it would also be normal?
    Best
    Luciano

Share This Page