Pedal and Pedal Setup help! Please

Discussion in 'Effects [BG]' started by JoshSmith, Nov 10, 2013.


  1. JoshSmith

    JoshSmith

    Joined:
    Jul 23, 2013
    I'm very new to pedals and pedal setup/pedal board. So I have a ProCo RAT 2 and a Sansamp BDDI. I plug my bass into the RAT which is plugged into an outlet using the 9v plug. From that I plug the rat into the Sansamp the the Sansamp into my head. Is this okay and fine and not ruining pedals? This may be a dumb question but I'm new to this. So please help!
    Thanks!
  2. warwick.hoy

    warwick.hoy

    Joined:
    Aug 20, 2006
    Location:
    Spokane, WA.
    Disclosures:
    Beta Tester: Source Audio.
    Your pedals will be fine.
  3. Downunderwonder

    Downunderwonder

    Joined:
    Aug 26, 2009
    Location:
    New Zealand
    You could be an idiot, wiring up custom 9v to audio mayhem, but assuming you aren't an idiot I concur!
  4. JoshSmith

    JoshSmith

    Joined:
    Jul 23, 2013

    Hahah, so I'm fine?
  5. warwick.hoy

    warwick.hoy

    Joined:
    Aug 20, 2006
    Location:
    Spokane, WA.
    Disclosures:
    Beta Tester: Source Audio.
    Wait. Maybe I'm confused. Are you saying your using one of these?

    [​IMG]?

    A more elegant solution would be to use on of these

    [​IMG]

    If you are using a stock wall wart then carry on. Also. I saw your other thread. Yeah I don't have an answer with regards to the thumb screw. Sorry.
  6. JoshSmith

    JoshSmith

    Joined:
    Jul 23, 2013

    I'm using the second picture and it's connected to a 9v wall plug in thing I got at guitar center
  7. warwick.hoy

    warwick.hoy

    Joined:
    Aug 20, 2006
    Location:
    Spokane, WA.
    Disclosures:
    Beta Tester: Source Audio.
    yeah your good
  8. JoshSmith

    JoshSmith

    Joined:
    Jul 23, 2013

    Alright thanks.

Share This Page