1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Pot Values for P/J bass

Discussion in 'Pickups & Electronics [BG]' started by jacksonev94, Dec 10, 2013.

  1. jacksonev94

    jacksonev94 Supporting Member

    Joined:
    May 12, 2012
    Likes Received:
    0
    I'm redoing the rather shoddy wiring job that the previous owner did on my converted-to P/J squier. I ordered the new pickguard, and don't really have any desire to add a third knob and have to drill a hole in the new pickguard.

    I was planning on using a stacked volume/volume pot to a tone pot, but I can't find any stacked pots that have the same values. They're all 250k+500k. Can anyone point me in the right direction?
  2. line6man

    line6man

    Joined:
    Jun 20, 2008
    Likes Received:
    2
    Buy two non-sealed pots and swap the wapers out.

Share This Page